Protherm Tiger Condens 20/26 KKZ 42 + MiGo smart controller

Product detailed description

NEW DESIGN OF TIGER CONDENS BOILERS

NEW FEATURES

 

New FlameFit optimal combustion technology - higher efficiency, lower flue gas emissions, lower gas consumption, a technology focused on optimal combustion of different types of gas supplied from various sources with different quality and composition. 

 

New casing design - a renewed design of the boilers (casing, control panel), while the footprint and connection dimensions were kept the same as in the previous version of the boilers, to make quick and easy boiler replacement easier.

 

New control panel design - the appearance of the panel matches the look of the new eBUS controllers, touch buttons, a backlit display, simple and intuitive operation and setup, whether for the customer or for the service technician.

 

New Isodyn3 intelligent storage tank heating technology - new intelligent heating of built-in storage tanks, guaranteeing exceptional comfort of DHW supply. A tried and patented technology. Even greater energy savings than with the previous Isodyn2 heating technology.

 

"Smart shower" function - the combi boiler guarantees comfortable DHW preparation while showering, so that even during an interruption of DHW supply to the shower (while lathering up), it still waits for the next DHW draw-off and does not switch to heating even if there is a demand (it waits 3 minutes).

 

Accessory connectivity - simple connection and quick attachment of external control accessories such as an internet gateway and/or a wireless room controller, without the need to open the boiler casing, even for the end customer.

 

Compatibility with the latest eBUS controllers - the appearance of the control panel matches the look of the new eBUS controllers, similar operation, and easy handling.

 

NEW TECHNOLOGIES OF TIGER CONDENS BOILERS

 

FlameFit technology - guarantees permanent and automatic optimization of gas combustion, which reduces gas consumption and also keeps flue gas emissions low. And all this regardless of the quality of the given type of gas. In addition, FlameFit technology supports lowering the boiler's minimum output and also increases its modulation range. 

  

The new FlameFit technology FlameFit technology consists mainly of

placing a special ionization electrode just

above the surface of the burner. By applying a voltage, an electric

current flows through the flame between the electrode and the burner,

current flows through the flame between the electrode and the burner, the magnitude of which depends on the quality of the flame. 

 

- with intelligent heating of the built-in storage tank

- guarantees exceptional comfort of hot water supply by the wall-mounted boiler itself

- now also with an improved "intelligent way of heating storage tanks" for even greater energy savings

 

 

5 key advantages of IsoDyn3 technology:

1. Exceptional DHW flow rate for a wall-mounted boiler (up to 210 L of hot water at 40°C over 10 min)

2. A storage tank reheating time of 5 minutes for the next draw-off of another 210 L of hot water

3. High temperature stability of the drawn-off water, regardless of the number of simultaneously open draw-off points

4. Fast delivery of hot water to the draw-off point (especially at low draw-offs), minimal waiting time (saving time and wasted water)

 

 

 

5. New: intelligent storage tank heating - a new storage tank heating technology only at times when hot water is required according to the household's habits, which saves energy and thus also the costs of DHW heating

 

 

 

 

EASY AND INTUITIVE OPERATION

 

Operation is as simple and intuitive as operating your smartphone. The control panel shows you what your consumption is, what temperature the water is, or when a service inspection is needed. The Mipro Sense weather-compensated controller has the same control panel, so you will have all the information and functions easily available.

 

PARAMETERS

	Tiger Condens 20/26 KKZ 42
Heating
Energy class for heating	A
Output at 80/60°C temperature gradient	2.5 - 20.0 kW
Output at 50°C/30°C temperature gradient	2.8 - 21.9 kW
Heating water flow temperature control range	15 - 80 °C
Max. working pressure	0.3 MPa (3.0 bar)
Heating water expansion vessel	12 l
NOx class	6
Domestic hot water preparation
Maximum output when preparing DHW	26.0 kW
Range of DHW flow temperature control	45 - 65 °C
DHW flow rate limiter	12 l/min
Permitted operating pressure of cold potable water	0.03 - 1.0 MPa (0.30 - 10.0 bar)
Required connection pressure of cold potable water	0.2 MPa (2.0 bar)
Minimum DHW flow rate	1 l/min
Specific flow rate D (ΔT = 30 K)	18.5 l/min
DHW storage tank volume	42.0 l
DHW expansion vessel	2 l
Electrical parameters
Voltage/frequency	230 V/50 Hz
Maximum electrical power input	115 W
Power input in standby mode	2 W
Electrical protection rating [IP]	IPX4D
Dimensions
Gas connection	G 1/2"
Heating connections	G 3/4"
Cold/hot water connections on the boiler side	G 3/4"
Safety valve connection	15 mm
Condensate drain hose	21.5 mm
Dimensions of the boiler (width/height/depth)	470/ 893/ 514 mm
Weight (without packaging, without water)	55 kg
Weight, in standby (filled) state	104 kg

 

PROTHERM MiGo - smart controller

With the MiGo controller you can easily control your heating and water heating from anywhere using the app on your smartphone or tablet. What do you get? Greater comfort, lower energy expenses, and the ability to set the desired room temperature remotely.

Frequently asked questions

• How do I verify that "Protherm Tiger Condens 20/26 KKZ 42 + MiGo smart controller" fits my appliance exactly? The most reliable way is to compare the exact type/catalog designation from your appliance's rating plate (boiler, storage tank, heater) with the compatibility stated directly in the name of this product (brand PROTHERM) and in its technical parameters above. If in doubt, write to us with the exact type designation of your appliance (including the serial number, if any) - we will be happy to verify the compatibility for you.
• Why is it important to use an original/compatible part, and not a universal replacement? Parts such as gaskets, sensors, or safety elements (safety valves, thermal fuses) are usually dimensioned exactly to the parameters of the specific appliance (pressure, temperature, sensor electrical resistance) - an incorrect part can cause reduced functionality, leaks, or, in the case of safety elements, a real safety risk.
• Must this part be installed by a professional? For simpler, mechanical parts (e.g. gaskets, covers, small accessories without a connection to electricity, gas, or the pressure part), a handy do-it-yourselfer can usually manage the replacement after disconnecting the appliance from the power supply and pipework. However, for any intervention in the gas, electrical, or pressure part of the appliance (e.g. sensors directly in the combustion chamber, safety valves, electrical modules), we always recommend a service technician - especially since such an intervention could affect the validity of the warranty on the whole appliance.
• How do I recognize that this part is worn and needs to be replaced? Common symptoms are visible wear/cracking (for gaskets and rubber parts), a leak of water or flue gases at the location of the part, an error message on the control display (for sensors and electronic modules), or an obviously reduced functionality of the appliance (e.g. irregular combustion for burner parts). If in doubt, the safest thing is to have the condition assessed by a service technician during the regular annual inspection.
• Is it worth having this part at home as a spare/service part? For parts that are commonly subject to wear (gaskets, fuses, small mechanical parts) and whose failure would mean a shutdown of heating or water heating, keeping a spare in advance is a reasonable precaution - especially for an older appliance, for which it may be more difficult to obtain the part quickly.