Soft jacket made of synthetic material together with high-quality ECO polyurethane insulation with a low conductivity coefficient.
External temperature indicator with pressure gauge.
Tank enamelled with a highly durable, damage-resistant zirconium coating using a special formula.
Sleeves for placing additional temperature sensors, for controlling multiple heat sources.
Easily accessible service ports and mounting connections.
Anode protection of the tank
A combined safety valve (6 bar) is included.
Locking feet for optimal positioning.
2+3 year warranty on the heater tank.

Description and dimensions:

Description	Dimensions
1. Thermometer	A = 210 mm
7. Electric heating element cover	C = 660 mm
9. Cold water inlet: G 3/4"	D = 600 mm
10. Circulation: G 3/4"	G = 75 mm
11. Hot water outlet: G 3/4"	H = 1150 mm
12. Hot water outlet: G 3/4"	M = 690 mm
	P = 890 mm

Parameters	ENERGY V0S 150
Capacity (l)	150
Insulation type	rigid foam
Annual electricity consumption (kWh/annum)	2339
Power supply (V)	230
Rated pressure (MPa)	0,8
Electric power (kW)	3
Mixed water heated to 40 °C (l)	268
Weight (kg)	52
Energy class	C

Frequently asked questions

What tank capacity should I choose? A common consumption estimate is based on approx. 40–50 litres of hot water (at approx. 40–45 °C) per person per day for standard use (showering, washing); for bathing in a tub or a higher number of bathrooms/draw-off points, plan for a larger capacity. When choosing, also consider whether the tank will be heated by a high-output boiler (faster heating, a smaller capacity may be sufficient) or, for example, only by a solar system (in which case a larger capacity is worthwhile for storing heat accumulated during the day).
Can I connect this Q-TERMO tank to my existing boiler? In most cases, yes, but you should check the compatibility of the hydraulic connection (dimensions and connector type) and whether your boiler supports controlling the tank\'s heating (a temperature sensor in the tank and possibly a switching valve are required) – you can find these details in the product\'s technical parameters, or our customer service can advise you.
Where and how is the tank installed? The tank is installed as close as possible to the heat source (the boiler) to minimise heat losses in the connecting pipework, while still leaving enough space around it for service access (anode replacement, safety valve inspection).
Must installation be done by a professional? We always recommend leaving the hydraulic connection to the water supply and to the heat source, including fitting the safety valve at the correct pressure, to a heating engineer/plumber – an incorrectly fitted or missing safety valve is a safety hazard.