Q-TERMO Trend 150 KLN
Code: TREND150KLNRelated products
Protherm Panther Condens 25 KKO - 2021 model- wall-hung condensing boiler with the...
Avansa 2007 - programmable weekly thermostat The Avansa 2007 room...
Avansa AUTO 25/6/180 Circulation Pump The Avansa AUTO 25/60 180mm circulation...
Magnetic dirt separator for vertical and horizontal pipework CALEFFI DIRTMAG®...
Screw coupling 16x16 with screw union requires no pressing, for use with...
Product detailed description
-
Water heating by electric heating elements and a tube heat exchanger with the option of connection to buildings with hot-water central heating
-
Connection of the heat exchanger, side connection: KL – left-hand connection, KP – right-hand connection (as viewed facing the heater)
-
Sleeve for the sensor collar
-
Technology ANTICALC - with two dry elements protected in a steel sleeve and independently connected electric heating elements
-
Newly reinforced walls of the inner tank for a longer service life
-
Modern, functional design of the appliance
-
Connection to full water pressure (up to 0.6 MPa)
-
External rotary thermostat with a range up to 75 °C
-
Safety resettable fuse against overheating
-
"Anti-freeze" - frost protection
-
External temperature indicator and illuminated water heating switch
-
Tank enamelled with a highly resistant zirconium coating with a special damage-resistant formula
-
ECO polyurethane insulation with a low thermal conductivity coefficient guarantees lower heat losses than European standards
-
Pressure relief valve
-
Recommended expansion vessel volume: 5 l
-
2+3 year warranty on the heater tank

| Description | Dimensions |
| 1. Hot water outlet | A = 1200 mm |
| 2. Cold water inlet | B = 110 mm |
| 3. Temperature indicator | C = 1160 mm |
| 4. Control panel | D = 496 mm |
| 5. Sleeve for sensor collar | E = 1050 mm |
| 6. Heating water inlet | F = 150 mm |
| 7. Heating water outlet | G = 510 mm |
| 8. Circulation | I = 243 mm |
| J = 340 mm | |
| Height = 1200 mm | |
| Width = 496 mm |
| Parameters | TREND 150 KLN | |||
|---|---|---|---|---|
| Volume (l) | 150 | |||
| Inner tank surface | enamel | |||
| Power supply (V/Hz) | 1/N/PE ~ 230/50 | |||
| Total heating element output (W) | 2400 | |||
| Water heating time from 12 to 65 °C (h) | 4,1 | |||
| Mixed water heated to 37 °C (l) | 378 | |||
| Heat losses (kWh/24 h) | 1,11 | |||
| Heat exchanger surface area (m²) | 0,81 | |||
| Rated output of the upper heat exchanger (W) | 24 000 | |||
| Average insulation thickness (mm) | 32 | |||
| Water/heating connection (G") | 3/4" / 1" | |||
| Electrical protection rating | IP 24 | |||
| Weight (kg) | 60 | |||
| Energy class | C | |||
Additional parameters
| Category: | Combination Vertical |
|---|---|
| Warranty: | 2 years |
| Weight: | 60 kg |
| The item has been sold out… | |
Avansa 2007 - programmable weekly thermostat The Avansa 2007 room...
Clamp-on thermostat AVANSA TH 2A for circulation pump used to...
The ADEX TTUV electronic thermostat consists of the TTUV1 control module, the...
Euroster 11 E, thermostat for pump (central heating or DHW) Programmable...
Avansa AUTO 25/6/180 Circulation Pump The Avansa AUTO 25/60 180mm circulation...
Brass manifold for underfloor heating, 6-way, 1" connection.Number of circuits:...
Protherm Gepard Condens 25 MKO- wall-hung condensing boiler with the option to...
Large Thermostatic Head - Varnished size: M30 x 1.5,control range: +6°C...
Tesnenie threads ALPEX-GAS, IVAR.LOCTITE 55, balenie: 160 m,...
Brass threaded reducer 1/2" x 1/4" MF is the most commonly used...
Pipe insulation 18 mm (3/8") / 9mm Pipe insulation, or insulating foam for...
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
