Q-TERMO Trend 80 KL

Product detailed description

Combined vertical storage water heater Q-TERMO Trend 80 KL

Water heaters with ANTICALC technology offering increased resistance to limescale - ideal for areas with both very hard and soft water.

Features:

• Water heating by electric heating elements and a tube heat exchanger, with the option of connection to buildings with hot-water central heating
• Side connection of the heat exchanger: L - left-hand connection, P - right-hand connection (as viewed facing the heater)
• The exchanger works both with forced circulation and in a gravity (thermosiphon) system
• ANTICALC technology with two dry elements protected in a steel sleeve and independently connected electric heating elements
• ANODE TESTER informs the user about the condition of the anode protection
• "Anti-freeze" frost protection
• Classic, functional design of the appliance
• Connection to full water pressure (up to 0.8 MPa)
• External rotary thermostat with a range of 0-75°C
• Safety resettable fuse against overheating
• External temperature indicator
• Illuminated water heating switch
• Tank enamelled with a highly resistant zirconium coating with a special damage-resistant formula
• ECO polyurethane insulation with a low thermal conductivity coefficient guarantees lower heat losses than European standards
• Dual anode protection of the tank - two anode rods significantly extend the service life of the heater
• Pressure relief valve

Technical parameters:

• Volume: 80 l
• Inner tank surface: enamel
• Power supply: 1/N/PE ~ 230 V / 50 Hz
• Total heating element output: 2000 W
• Water heating time from 12 to 65°C: 2,6 h
• Mixed water heated to 37°C: 195 l
• Heat losses: 1,01 kWh/24 h
• Active exchanger surface area: 0,49 m2
• Average insulation thickness: 32 mm
• Water/heating connection: 1/2"/ 1/2"
• Electrical protection rating: IP 24
• Weight: 35 kg