Q-TERMO Trend 80 N
Code: TREND80NRelated products
Product detailed description
Water heaters with ANTICALC - technology offering increased resistance to limescale – ideal for areas with both very hard and soft water.
Features:
- Technology ANTICALC - with two dry elements protected in a steel sleeve and independently connected electric heating elements
- Newly reinforced walls of the inner tank for a longer service life
- New modern design of the appliance
- "Anti-freeze" - frost protection
- Connection to full water pressure (up to 0.6 MPa)
- External rotary thermostat with a range up to 70 °C (50 L models up to 65 °C)
- Safety resettable fuse against overheating
- External temperature indicator and illuminated water heating switch
- Tank enamelled with a highly resistant zirconium coating with a special damage-resistant formula
- ECO polyurethane insulation with a low thermal conductivity coefficient guarantees lower heat losses than European standards
- Pressure relief valve included in the package
- Recommended expansion vessel volume: 3 l
- 2+3 year warranty on the heater tank
Description and dimensions:
| Description | Dimensions |
| 1. Hot water outlet | A = 500 mm |
| 2. Cold water inlet | B = 650 mm |
| 3. Temperature indicator | C = 700 mm |
| 4. Rotary thermostat knob | D = 515 mm |
| 5. Flange with heating element | E = 528 mm |
| Height = 700 mm | |
| Width = 515 mm |
| Parameters | TREND 80 N | |||
|---|---|---|---|---|
| Volume (l) | 80 | |||
| Inner tank surface | enamel | |||
| Power supply (V/Hz) | 1/N/PE ~ 230V/50 | |||
| Total heating element output (W) | 2000 | |||
| Water connection (G") | 1/2" | |||
| Electrical protection rating | IP X4 | |||
| Pressure (MPa) | 0,6 | |||
| Weight (kg) | 25,1 | |||
| Energy class | C | |||
Additional parameters
| Category: | Discontinued |
|---|---|
| Warranty: | 2 years |
| Weight: | 10 kg |
| The item has been sold out… | |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!