Rubber Tile COSMOPOLITAN 30 x 30 cm, grey

• Stone Mosaic tiles 30 x 30 cm (anthracite, grey and brown colours)
• Natural Stone tiles 30 x 30 cm
• Cosmopolitan tiles 30 x 30 cm (brown, grey or anthracite colours)
• Cosmopolitan Extreme tiles 45 x 45 cm (anthracite, brown colours)
• Brickface tiles 40 x 40 cm (brown, grey colours)

For an easy selection and installation of patio flooring, read our article.

To help you choose the right pattern or colour shade, you can choose from Multy Home tile sample sets:

• Set of 4 samples - mix of patterns and colours
• Stone Mosaic tile set (4 colours)
• Cosmopolitan tile set 30 x 30 cm (3 colours)
• Cosmopolitan Extreme tile set 45 x 45 cm (3 colours)
• Natural Stone tile set (4 colours)

With Multy Home tiles, you have the assurance that they will keep the same shade for a long time. The tiles are laboratory tested for colourfastness.

The manufacturer guarantees the quality of its products through a certified quality management system. According to TÜV Nord tests, it also holds a certificate of origin for the recycled materials used.

• Jigsaw or a utility knife to cut the tiles
• Protractor
• Tape measure or ruler
• Rubber mallet

1. Make sure the floor surface is smooth, level, dry and clean.

2. Start laying in a corner so that the locks on the tile face in the direction of installation.

3. Continue until the desired area is covered.

4. If you encounter walls or obstacles, cut the tiles.

You can see the whole process in the video demonstration (the video is in English)

The tiles have practical grooves that serve to drain excess water. No puddles form on the surface of the tile and the flooring dries quickly after rain. The tiles also have a studded profile on the underside, which promotes drainage and helps water flow further into the base layer or drainage layer.

Do not place ordinary foils under the rubber flooring, as they prevent natural water drainage, have a limited service life, and the studded profile on the underside of the tiles may damage them.

Drainage layers

• If you are laying flooring on natural terrain, the base must be thoroughly levelled and compacted. Then use geotextile, which separates the individual layers and limits weed growth. A layer of sand or gravel should be placed on top of the geotextile to ensure proper drainage.
• Balcony and patio: The flooring can be laid on concrete or paving with a waterproofing coating. This creates a continuous protective layer, which prevents water seepage into the structure and limits the formation of cracks, concrete degradation, or leaking.

The estimated time for restocking additional tiles from the manufacturer is typically approximately 14 days. To order a larger quantity, please do not hesitate to contact us by email or phone.