Rubber Tile STONE MOSAIC 30 x 30 cm, green

• Stone Mosaic tiles 30 x 30 cm (anthracite, grey and brown colours)
• Natural Stone tiles 30 x 30 cm
• Cosmopolitan tiles 30 x 30 cm (brown, grey or anthracite colours)
• Cosmopolitan Extreme tiles 45 x 45 cm (anthracite, brown colours)
• Brickface tiles 40 x 40 cm (brown, grey colours)

For an easy selection and installation of terrace tiles, read our article.

To choose the right pattern or colour shade, you can choose between Multy Home tile sample sets:

• Set of 4 samples - mix of patterns and colours
• Stone Mosaic tile set (4 colours)
• Cosmopolitan tile set 30 x 30 cm (3 colours)
• Cosmopolitan Extreme tile set 45 x 45 cm (3 colours)
• Natural Stone tile set (4 colours)

With Multy Home tiles, you have a guarantee that they will keep the same shade for a long time. The tiles are laboratory tested for colour fastness.

The manufacturer guarantees the quality of its products through a certified quality management system. According to TÜV Nord tests, it also has a certificate of origin for the recycled materials used.

• Jigsaw or utility knife to cut the tiles
• Protractor
• Tape measure or ruler
• Rubber mallet

1. Make sure the floor surface is smooth, level, dry and clean.

2. Start laying in a corner, so that the locks on the tile point in the direction of installation.

3. Continue until the desired area is covered.

4. If you encounter walls or obstacles, cut the tiles.

You can see the whole process in the video demonstration (video is in English)

Installation principles:

• The surface should be firm, smooth, level, dry and clean.
• The installation temperature should be between 5–25 °C.

The tiles have practical grooves, which serve to drain excess water. No puddles form on the surface of the tile and the tiles dry quickly after rain. The tiles also have a knobbed profile on the underside, which supports drainage and helps water flow further into the sub-base or drainage layer.

Do not place ordinary foils under the rubber tiles, as they prevent natural water drainage, have a limited lifespan, and the knobbed profile on the underside of the tiles can damage them.

Drainage layers

• If you are laying the tiles on natural terrain, the base must be thoroughly leveled and compacted. Then use geotextile, which separates the individual layers and limits weed growth. On top of the geotextile, add a layer of sand or gravel, which ensures proper drainage.
• Balcony and terrace: The tiles can be laid on concrete or paving with a waterproofing coating. This creates a continuous protective layer that prevents water absorption into the structure and limits the formation of cracks, concrete degradation or leaks.

The estimated restocking time for additional tiles from the manufacturer is typically approximately 14 days. To order a larger quantity, feel free to contact us by e-mail or phone.