Senior 10" DUO filter set. Complete, 1" connection. Reduction of nitrates in water (QA 10 AF-SX) - water filter for water treatment

Product detailed description

This value-added set includes: 1x 10" Senior Duo filter, 1" 1x filter wrench 1+1x spacer rings for the filter cartridges 1x Duplex filter bracket 1x mechanical cartridge RL 10 SX 50mcr 1x anion cartridge 10" QA 10 AF-SX, nitrates 2x 1" ball valve MF,M 2x transition to PE 32x1" ZV Description of the SENIOR 10" DUO filter: The SENIOR 10" DUO filter is used for treating drinking and utility water in households and industry. It uses filter cartridges marked SX. Household use: filtration and treatment of drinking water, protection of taps, boilers, washing machines and other installations. Technical use: pre-filtration, micro-filtration, protection of pumps and heating systems, demineralisation and dechlorination, protection of reverse osmosis units. Technical information: Max. working pressure: 8 BAR Max. working temperature: 45°C Minimum water temperature: 4ºC Housing: PET Filter head: PP Sealing O-ring: EPDM Inlet/outlet thread: brass CW 614 N Dimensions (H x W x D) in mm: 325 x 228 x 107mm Description of the RL 10 SX 50mcr filter cartridge: The washable RL-SX filter cartridge is made of polypropylene and a 50 mcr polyester filter mesh. The cartridge is suitable for capturing mechanical impurities. A filter with an RL cartridge is used: on the inlet pipe into the building upstream of an individual appliance as protection for filter cartridges with finer filtration A rinsable, i.e. reusable, cartridge for capturing mechanical impurities larger than 50mcr is used as the first, basic protection for the water system and all connected appliances. In the case of heavier contamination or higher demands on cleaning quality, we recommend installing an ATLAS DUO filter with a second mechanical cartridge (50, 25, 5 or 1 mcr). The service life of the filter cartridge is 24 months; it needs to be rinsed every three months. Installation: into the pipe on the main water supply before or after the pump anywhere filtration of particles smaller than 50 mcr is needed Technical information: Max. temperature: 45ºC Max. flow rate (l/h): 2500 Dimensions (mm): 250 x 70 x 30 Manufacturer: ATLAS Filtri, Italy Description of the 10" QA 10 AF-SX filter cartridge A filter cartridge with a highly effective anion resin for reducing nitrates in small domestic and industrial installations. Household use: production of drinking water with nitrate reduction to a concentration below 10 mg/l, in compliance with the World Health Organization guideline. Technical use: protection of reverse osmosis units. We recommend a mechanical pre-filter to protect the cartridge. The filter cartridge with anion filling is used to reduce the nitrate content of water. It is a removable container filled with resin that works on the principle of ion exchange. As water flows through, it replaces nitrate ions in the water with chloride ions. It increases the chloride content of the outgoing water. Pre-filtration is required. The anion filling is regenerated with a table salt solution. The service life of the anion cartridge depends on the nitrate content of the water. Technical information: Max. working temperature: 45°C Max. concentration NaNO3: 200 ppm Max. concentration SO4: 200 - 300 ppm Max. temperature: 45ºC Max. flow rate (l/h): 50 Dimensions (mm): 252 x 70 x 28