Senior 10" TRIO Filter Set. Complete 1" Connection. Nitrate Reduction in Water (QA 10 AF-SX) | Water Treatment Filter

Product detailed description

This value-for-money set includes: 1x Senior 10" TRIO 1" filter 1x filter wrench 1+1x spacer rings for filter cartridges 1x Triplex filter holder 1x 10" RL SX 50mcr mechanical cartridge (washable) 1x 10" FA 25mcr cartridge (wound) 1x 10" QA 10 AF-SX anion cartridge 2x 1" MF,P ball valve 2x 32x1" ZV to PE transition Description of the SENIOR 10" TRIO filter: The SENIOR TRIO filter is used for the treatment of drinking and utility water in households and industry. Uses cartridges marked SX (three-stage filtration). Technical parameters: Max. operating pressure: 8 bar Max./min. water temperature: 45°C/4°C Filter housing: PET Filter head: PP Sealing O-ring: EPDM Inlet/outlet thread: brass CW 614 N Dimensions (H x W x D) in mm: 325 x 336 x 107 Description of the 10" RL SX mechanical cartridge: The washable RL-SX filter cartridge is made of polypropylene and a 50 mcr polyester filter mesh. The cartridge is suitable for capturing mechanical impurities. A filter with an RL cartridge is used: on the inlet pipe into the building before an individual appliance as protection for filter cartridges with finer filtration A rinsable, i.e. reusable, cartridge for capturing mechanical impurities larger than 50mcr is used as the first and basic protection of the water system and all connected appliances. In the event of greater contamination or higher demands on cleaning quality, we recommend installing an ATLAS DUO filter with a second mechanical cartridge (50, 25, 5, 1 mcr). The service life of the filter cartridge is 24 months; it needs to be rinsed every three months. Installation: into the pipe on the main water supply before or after the pump anywhere filtration of particles smaller than 50 mcr is needed Technical information: Max. temperature: 45ºC Max. flow rate (l/h): 2500 Dimensions (mm): 250 x 70 x 30 Manufacturer: ATLAS Filtri, Italy Description of the 10" FA wound filter cartridge: A filter cartridge made of wound polypropylene fiber, high-efficiency filtration of fine particles of rust, sand and grit. A single-use cartridge for capturing mechanical impurities larger than 25 mcr is used as basic protection for the water system and all connected appliances. In the event of greater contamination or higher demands on cleaning quality, we recommend installing an ATLAS DUPLEX filter with a second mechanical cartridge (50, 25, 5, 1 mcr). Suitable for drinking water. Service life: 3-6 months, depending on the level of impurities in the water, maintenance-free. Installation: into the pipe on the main water supply after the pump anywhere filtration of particles smaller than 25 mcr is needed Technical information: Max flow rate (l/h): 2000 Dimensions (mm): 250 x 61 x 28 Max. temperature: 45°C. Manufacturer: ATLAS Filtri, Italy Description of the 10" QA 10 AF-SX anion filter cartridge: A filter cartridge with a highly effective anion resin for reducing nitrates in small domestic and industrial installations. Domestic use: production of drinking water with nitrate reduction to a concentration below 10 mg/l, in compliance with World Health Organization guidelines. Technical use: protection of reverse osmosis units. We recommend a mechanical pre-filter to protect the cartridge. The anion-filled filter cartridge is used to reduce the nitrate content in water. It is a removable container filled with resin that works on the principle of ion exchange. As water flows through, it replaces nitrate ions in the water with chloride ions. It increases the chloride content in the outlet water. Pre-filtration is required. The anion filling is regenerated with a common salt solution. The service life of the anion cartridge depends on the nitrate content of the water. Technical information: Max. working temperature: 45°C Max. NaNO3 concentration: 200 ppm Max. SO4 concentration: 200 - 300 ppm Max. temperature: 45ºC Max. flow rate (l/h): 50 Dimensions (mm): 252 x 70 x 28