Straight Brass Ball Valve for Manifold with 1" Compression Fitting + Thermometer 0°C - 80°C, RED Handle

Product detailed description

Straight Brass Ball Valve for Manifold with 1" Compression Fitting + Thermometer 0°C - 80°C, RED Handle

A straight brass ball valve designed for fitting onto a manifold with a 1" compression fitting. It includes a built-in thermometer with a range of 0 °C - 80 °C for checking the temperature of the heating/cooling water directly at the manifold.

What makes this valve stand out

• Instant temperature check - the built-in thermometer shows the water temperature without the need for additional measuring instruments.
• Quick circuit shut-off - the ball valve opens/closes with a single quarter-turn, making operation faster and more intuitive than, for example, needle valves.
• Colour coding - the red handle clearly indicates which side of the manifold (flow/return) is open or closed during operation.

Technical parameters

• Material: brass
• Type: straight
• Connection: 1" with compression fitting
• Thermometer range: 0 °C - 80 °C
• Handle colour: red

Installation

The valve screws directly onto the end of the manifold (inlet or outlet) using a 1" half-union compression fitting. Once fitted, you connect the pipe from the heat source to the free side of the valve. We recommend fitting both valves (flow and return) at the same time, so that the whole manifold can easily be shut off if needed.

Important when ordering

Ball valves are always fitted to the manifold in pairs - one on the flow and one on the return. For this red valve you therefore also need to order the corresponding blue one (the colour coding makes it easier to tell the flow and return apart). A T-KIT with both colours in one package is also available (1x blue + 1x red + 2x rubber seal).

Frequently Asked Questions

• Do I have to buy both valves at once? We recommend it - the manifold needs one valve on the flow and one on the return so that you can shut it off completely.
• Is the thermometer included with the valve? Yes, the thermometer is already built in and ready to use.