Support Sleeve 15 mm
Code: HX60/15Product detailed description
Stainless steel support sleeves for pipes are used to reinforce the pipe and help it keep a precise round shape. They also serve to calibrate the pipe end, covering the sharp edges left after cutting.
This particular sleeve is suitable for a pipe diameter of 15 mm
Demountable straight-type fittings. Used to join polybutylene pipe and copper pipe. Can be used for radiator heating, drinking water, and underfloor heating. The internal jaws grip the pipe and prevent it from being pulled out. To disassemble, simply unlock the fitting with the special tool and remove the pipe.
 |
The most important facts about the HEPWORTH system that you should know before self-installation. | ||
 |
A fully demountable system. | ||
| This means you can assemble the system, take it apart later, and put it back together again. This is useful if you are not completely sure about the heating installation. | |||
|
Installation without any tools. | ||
|
One of the system's biggest advantages is tool-free installation. This means the pipe is simply pushed into the fitting, and the internal jaw mechanism secures it in place. To disassemble, you just unscrew the fitting, slide the jaws off the pipe, then reassemble and tighten the fitting, and it is ready for use again. |
|||
|
Universal use for all types of heating. | ||
| All fittings, tees, elbows and pipes are made of polybutylene, meaning you can use it for radiator heating installations, underfloor heating, or domestic hot water (DHW) distribution. All diameters are backward compatible. | |||
|
Pipe made of polybutylene. | ||
| Polybutylene - the oldest and still best-proven material for heating and water distribution. | |||
|
Pipes with an oxygen barrier | ||
| All pipes are made with an EVOH oxygen barrier, which prevents oxygen molecules from penetrating the heating system. Over the years, oxygen causes boiler corrosion and degradation of the heating system. The oxygen barrier prevents this problem. | |||
|
Polybutylene is one of the most hygienic materials | ||
| In terms of hygiene, polybutylene achieves the best results. |
Frequently asked questions
- How do I check that this part fits my HEPWORTH pipe? Compare the size (pipe diameter in mm or inch thread) stated in this product's name with the diameter of your pipe - the HEPWORTH system uses its own precisely defined size ranges.
- Must the installation be carried out by a professional? Clips, anchors and wall plates are common installation accessories intended for DIY installation as well; however, we recommend having the connection of the pipework into a functional heating or water system checked by a professional.
Additional parameters
| Category: | pipe support inserts |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.1 kg |
Product rating
Be the first who will post an article to this item!
The average product rating is 5,0 out of 5 stars.
1 rating
5
4
3
2
1
Leave a rating
List of ratings
Discussion
List of discussions
J
juraj
juraj
Pekný deň. Ako je mozne napojiť system Heptworth na terajsí systém plastových rúrok , stačí do pprier vložiť prechodový kus a napojiť ? Pekný deň.
M
marian
marian
Dobrý deň, ak som správne pochopil, tieto vsuvky sa musia dávať do trubiek, aby spoj držal. Môžem tento systém rozvodu zamurovať, tak ako je, alebo treba myslieť aj na dilatačnú rozťažnosť. A ešte jedna otázka, keď použijem tieto vsuvky na rozvod pitnej vody, nie je hliník škodlivý? Vopred ďakujem.
M
marian
marian
Ďakujem za odpoveď. Pekný deň.
A
andrej
andrej
Rado sa stalo. Tiež som ostal trochu zneistený tou informáciou o hliníkových vsuvkách, preto som si chcel na spektometri overiť chemické zloženie. Som nadmieru spokojný. AISI 316 je hojne používaná aj v potravinárskom, mliekarenskom priemysle. Pekný zvyšok víkendu.
A
ATRIA
ATRIA
Tak takýto rozbor sme nečakali, každopádne ďakujeme. Pekný víkend
A
andrej
andrej
Ako som už uviedol vo vlákne k 15mm potrubiu. Jedná sa o chróm-nikel-molybdénovú nerezovú oceľ. Chemické zloženie: Cr - 17%; Ni - 10,25%; Mo - 2%. Vzhľadom na zloženie ide o nerezovú oceľ 17 346, resp. AISI 316. Preložené pre netechnikov - pre dané použitie sa jedná o veľmi slušnú kvalitu, vďaka obsahu molybdénu sa táto oceľ nezľakne ani kyselín.
A
ATRIA
ATRIA
Vsuvky sa dávajú len na to, aby potrubie po odstrihnutí držalo presnú kruh pri vložení do spojky a tým pásom aby tesnilo. Potrubie sa častejšie dáva zamurovať, ale s nejakou rozťažnosťou som sa nikdy nestretol, nieje to ako PPR, kde sa musí dávať ešte dilatačný kus, atd. Vsuvky z hliníka niesu, bude to nejaký typ plechu, skôr nerez. Pekný deň.
J
jan b
jan b
Dobrý deň, na internete ako aj v reklamnom videu sú znázornené vsuvky s nepravidelným kruhovým tvarom. Obrázok vo Vašej ponuke je s pravidelným kruhom. Ako popisuje video pri zasunutí potrubia napríklad do kolienka je potrebné aj pootočenie. Jedná sa o iný typ vsuvky? ( new generation? ) alebo obrázok vsuvky na Vašej stránke nezodpovedá skutočnosti?
J
jan
jan
Aký má DN tá vsuvka , vnútorný priemer?
A
ATRIA
ATRIA
Dobrý deň, slúži na výstuženie, nie je to podstatné. Pekný deň.