WPC tile LEGI BASE 30 x 30 cm, chocolate

For 30 x 30 cm tiles, you will need on average 11 pieces per 1 m2 when installing on a symmetrical area (square or rectangular) without any other obstacles.

For a non-symmetrical area, we recommend ordering extra tiles as a reserve.

The LEGI tile sample set will help you choose, as it contains all available colour combinations and patterns.

For easy selection and installation of terrace tiles, read our article.

LEGI tiles are available in BASE and STYLE patterns. You can also choose from possible alternatives:

• WPC tiles Guttadeck or G21
• Tiles made of a composite of recycled rubber and plastic (PP) Multy Home - Stone Mosaic, Cosmopolitan, Natural Stone or Arista
• Rubber tiles with artificial turf

Check out our article comparing the various materials used for terrace tiles.

• Colour fastness test (UV protection) according to AATCC TM16.3-2020 with a xenon lamp with a result of Grade 4.0 (standard to high colour fastness)
• Slip resistance test according to EN 13451-1:2020 - classification class C (angle 32° compared to the limit of 24° = above-standard result)
• Fire reaction and smoke production according to EN ISO 9239-1:2010 and EN ISO 11925-2:2020 standards - class Cfl-s1 (above-standard result within the achieved class)
• Resistance to falling mass according to EN 15534-4:2014 and EN 15534-1:2014 - a test with a falling mass of 1 kg from a height of 70 cm resulted in no visible cracks larger than 0.07 mm
• Swelling and water absorption - test performed according to EN 15534-4:2014. Dimensional change of less than 4% on average after 28 days of immersion

1. Place the first tile in the corner and leave a 5 mm gap from the wall.
2. Snap the connecting clips of the second tile onto the first tile.
3. Install the other tiles in the same way.
4. After installation, you can trim any excess parts with a cutter.

You can also find the installation instructions with graphic examples on the tile's cardboard packaging.

The following will come in handy for installation:

• A cross-cut saw or a cutting knife for rounding off the tile
• A carpenter's square
• A measuring tape or a ruler

When laying tiles, make sure the surface is:

• Flat
• Sufficiently firm
• Dry and clean

WPC LEGI tiles are not suitable for installation on insulating or other foils. The sharp edges of the tiles can damage them.

You can find an overview of the most common mistakes when laying terrace tiles, including instructions on how to avoid them, in our article.

The tiles have practical grooves that serve to drain excess water. No puddles form on the surface of the tiles and the tiles dry quickly after rain. The profile of the underside of the tiles allows for natural water drainage.

The tiles can be laid on concrete or paving with a waterproofing coating. This creates a continuous protective layer that prevents water penetration into the structure and limits the formation of cracks, concrete degradation or leaks.

The tiles require no specific maintenance. Even in the case of heavy soiling, the tiles can be effectively cleaned, either with a high-pressure cleaner or a regular mop. Check out the video demonstration.