WPC Tile LEGI STYLE 30 x 30 cm, anthracite

For 30 x 30 cm tiles, you will need on average 11 pieces per 1 m2 when laying on a symmetrical surface (square or rectangular) without any obstacles.

For an asymmetrical surface, we recommend ordering extra spare tiles.

The LEGI tile sample set, which contains all available color combinations and patterns, will help you choose.

For easy selection and installation of terrace tiles, read our article.

LEGI tiles are available in the BASE and STYLE patterns. However, you can also choose from possible alternatives:

• WPC tiles Guttadeck or G21
• Tiles made of a composite of recycled rubber and plastic (PP) Multy Home - Stone Mosaic, Cosmopolitan, Natural Stone or Arista
• Rubber tiles with artificial turf

Check out the article comparing different terrace tile materials.

• Color fastness (UV protection) test according to AATCC TM16.3-2020 with a xenon lamp, result Grade 4.0 (standard to high color fastness)
• Slip resistance test according to EN 13451-1:2020 - classification class C (angle of 32° versus the limit of 24° = above-standard result)
• Fire reaction and smoke production according to EN ISO 9239-1:2010 and EN ISO 11925-2:2020 - class Cfl-s1 (above-standard result within the achieved class)
• Resistance to falling mass according to EN 15534-4:2014 and EN 15534-1:2014 - a test with a falling mass of 1 kg from a height of 70 cm resulted in no visible cracks larger than 0.07 mm
• Swelling and water absorption - test carried out according to EN 15534-4:2014. Average dimensional change of less than 4% after 28 days of immersion

1. Place the first tile in the corner and leave a 5 mm gap from the wall.
2. Snap the connecting clips of the second tile onto the first tile.
3. Install the remaining tiles in this manner.
4. After installation, any excess parts can be cut off with a jigsaw.

Installation instructions with graphic examples can also be found on the cardboard packaging of the tiles.

You will find the following useful for installation:

• A jigsaw or a snap-off knife for cutting the tile
• A square
• A tape measure or ruler

When laying tiles, make sure the base is:

• Level
• Sufficiently firm
• Dry and clean

LEGI WPC tiles are not suitable for laying on insulation or other foils. The sharp edges of the tiles could damage them.

You can find an overview of the most common mistakes when laying terrace tiles, including instructions on how to avoid them, in our article.

The tiles have practical grooves that serve to drain excess water. No puddles form on the surface of the tiles, and the flooring dries quickly after rain. The profile of the underside of the tiles allows for natural water drainage.

The tiles can be laid on concrete or paving with a waterproofing coating. This creates a continuous protective layer that prevents water infiltration into the structure and limits the formation of cracks, concrete degradation or leaks.

The flooring does not require any special maintenance. Even in the case of heavy soiling, the tiles can be effectively cleaned with a pressure washer or a regular mop. Watch the video demonstration.