WPC tile LEGI STYLE 30 x 30 cm, chocolate

For 30 x 30 cm tiles, you will need an average of 11 pieces per 1 m2 when installing on a symmetrical area (square or rectangular) without any obstacles.

For non-symmetrical areas, we recommend ordering extra spare tiles.

A set of LEGI tile samples, containing all available color combinations and patterns, will help you choose.

For an easy selection and installation of terrace tiles, read our article.

LEGI tiles are available in the BASE and STYLE patterns. However, you can also choose from possible alternatives:

• WPC tiles Guttadeck or G21
• Tiles made of recycled rubber and plastic (PP) composite Multy Home - Stone Mosaic, Cosmopolitan, Natural Stone or Arista
• Rubber tiles with artificial turf

Check out the article comparing individual terrace tile materials.

• Color fastness (UV protection) test according to AATCC TM16.3-2020 using a xenon lamp with a result of Grade 4.0 (standard to high color fastness)
• Slip resistance test according to EN 13451-1:2020 - classification class C (32° angle versus the 24° limit = above-standard result)
• Fire reaction and smoke production according to EN ISO 9239-1:2010 and EN ISO 11925-2:2020 - class Cfl-s1 (above-standard result within the achieved class)
• Impact resistance according to EN 15534-4:2014 and EN 15534-1:2014 - the falling mass test with a 1 kg mass dropped from a height of 70 cm resulted in no visible cracks larger than 0.07 mm
• Swelling and water absorption - test performed according to EN 15534-4:2014. Average dimensional change of less than 4% after 28 days of immersion

1. Place the first tile in the corner and leave a 5 mm gap from the wall.
2. Snap the connecting clips of the second tile onto the first tile.
3. Install the remaining tiles in the same way.
4. After installation, excess parts can be cut off with a jigsaw.

Installation instructions with graphic illustrations can also be found on the tiles' cardboard packaging.

The following tools will be useful for installation:

• A jigsaw or a snap-off knife for cutting the tile
• A square
• A tape measure or a meter stick

When installing the tiles, make sure the surface is:

• Level
• Sufficiently firm
• Dry and clean

WPC LEGI tiles are not suitable for installation on insulating or other foils. The sharp edges of the tiles could damage them.

An overview of the most common mistakes when installing terrace tiles, including instructions on how to avoid them, can be found in our article.

The tiles have practical grooves that drain excess water. No puddles form on the surface of the tiles, and the tiles dry quickly after rain. The profile of the tiles' underside allows for natural water drainage.

The tiles can be installed on concrete or paving with a waterproofing coating. This creates a continuous protective layer that prevents water infiltration into the structure and reduces the occurrence of cracks, concrete degradation, or leaks.

The tiles require no specific maintenance. Even when heavily soiled, the tiles can be effectively cleaned using a pressure washer or a regular mop. Watch the video demonstration.