WPC tile LEGI STYLE 30 x 30 cm, coffee

For 30 x 30 cm tiles, you will need an average of 11 pieces per 1 m2 when installing on a symmetrical area (square or rectangular) without any obstacles.

For an asymmetrical area, we recommend ordering extra tiles as a reserve.

The LEGI tile sample set, which contains all available color combinations and patterns, will help you choose.

For easy selection and installation of terrace tiles, read our article.

LEGI tiles are available in the BASE and STYLE patterns. However, you can also choose from possible alternatives:

• WPC tiles Guttadeck or G21
• Tiles made of recycled rubber and plastic (PP) composite Multy Home - Stone Mosaic, Cosmopolitan, Natural Stone or Arista
• Rubber tiles with artificial turf

Check out the article comparing the different materials used for terrace tiles.

• Colorfastness (UV protection) test according to AATCC TM16.3-2020 with a xenon lamp, with a result of Grade 4.0 (standard to high color fastness)
• Slip resistance test according to EN 13451-1:2020 - classification class C (angle of 32° compared to the limit of 24° = above-standard result)
• Fire reaction and smoke production according to EN ISO 9239-1:2010 and EN ISO 11925-2:2020 standards - class Cfl-s1 (above-standard result within the achieved class)
• Resistance to mass impact according to EN 15534-4:2014 and EN 15534-1:2014 - a test with a falling mass of 1 kg from a height of 70 cm was carried out with no visible cracks larger than 0.07 mm
• Swelling and water absorption - test performed according to EN 15534-4:2014. Average dimensional change of less than 4% after 28 days of immersion

1. Place the first tile in the corner, leaving a 5 mm gap from the wall.
2. Click the connecting clips of the second tile onto the first tile.
3. Install the remaining tiles in the same way.
4. After installation, any excess parts can be cut off with a jigsaw.

Installation instructions with graphic examples can also be found on the cardboard packaging of the tiles.

The following tools will come in handy for installation:

• A jigsaw or a snap-off knife for cutting the tile
• A square
• A tape measure or a ruler

When laying the tiles, make sure the base is:

• Level
• Sufficiently firm
• Dry and clean

WPC LEGI tiles are not suitable for installation on insulating or other foils. The sharp edges of the tiles could damage them.

You can find an overview of the most common mistakes when laying terrace tiles, along with instructions on how to avoid them, in our article.

The tiles have practical grooves that serve to drain excess water. No puddles form on the surface of the tiles, and the flooring dries quickly after rain. The profile of the underside of the tiles allows for natural water drainage.

The tiles can be laid on concrete or paving with a waterproofing coating. This creates a continuous protective layer that prevents water from soaking into the structure and limits the formation of cracks, concrete degradation or leaks.

The flooring requires no specific maintenance. Even in the case of heavy soiling, it can be effectively cleaned with both a pressure washer and a regular mop. Watch the video demonstration.