WPC Tile LEGI STYLE 30 x 30 cm, teak

For 30 x 30 cm tiles, you will need an average of 11 pieces per 1 m2 when laying on a symmetrical area (square or rectangular) without any obstacles.

For non-symmetrical areas, we recommend ordering extra spare tiles.

The LEGI tile sample set will help you choose - it contains all available color combinations and patterns.

For easy selection and installation of terrace decking, read our article.

LEGI tiles are available in BASE and STYLE patterns. However, you can also choose from possible alternatives:

• WPC tiles Guttadeck or G21
• Tiles made of recycled rubber and plastic (PP) composite Multy Home - Stone Mosaic, Cosmopolitan, Natural Stone or Arista
• Rubber tiles with artificial grass

Check out the article comparing individual terrace tile materials.

• Color fastness test (UV resistance) according to AATCC TM16.3-2020 with a xenon lamp, result Grade 4.0 (standard to high color fastness)
• Slip resistance test according to EN 13451-1:2020 - classification class C (32° angle vs. the 24° limit = above-standard result)
• Fire reaction and smoke production according to EN ISO 9239-1:2010 and EN ISO 11925-2:2020 standards - class Cfl-s1 (above-standard result within the achieved class)
• Resistance to falling mass according to EN 15534-4:2014 and EN 15534-1:2014 - test with a falling 1 kg mass from a height of 70 cm resulted in no visible cracks larger than 0.07 mm
• Swelling and water absorption - test performed according to EN 15534-4:2014. Average dimensional change of less than 4% after 28 days of immersion

1. Place the first tile in the corner and leave a 5 mm gap from the wall.
2. Click the connecting clips of the second tile onto the first tile.
3. Install the remaining tiles in the same way.
4. After installation, any excess parts can be cut off with a jigsaw.

Installation instructions with graphic examples can also be found on the cardboard packaging of the tiles.

The following tools will be useful for installation:

• A jigsaw or a snap-off knife for cutting the tile
• A square
• A tape measure or ruler

When laying the tiles, make sure the surface is:

• Level
• Sufficiently firm
• Dry and clean

LEGI WPC tiles are not suitable for laying on insulation or other foils. The sharp edges of the tiles could damage them.

You can find an overview of the most common mistakes when laying terrace decking, including instructions on how to avoid them, in our article.

The tiles have practical grooves, which allow excess water to drain away. No puddles form on the tile surface, and the decking dries quickly after rain. The profile of the underside of the tiles allows for natural water drainage.

The decking can be laid on concrete or paving with a waterproofing coating. This creates a continuous protective layer that prevents water from soaking into the structure and reduces the occurrence of cracks, concrete degradation, or leaks.

The decking requires no specific maintenance. Even in the case of heavy soiling, it can be effectively cleaned with a pressure washer or a regular mop. Watch the video demonstration.