Avansa 110 E

Product detailed description

Avansa 110 E, thermostat for pumps and boiler rooms

The AVANSA 110-E thermostat is designed to control the heating pump. The thermostat's task is to switch the pump on when the temperature exceeds the set value, and switch it off when the boiler cools down (because it has gone out). This prevents unnecessary pump operation, which saves electricity (depending on boiler usage, savings of up to 60% are possible) and extends the pump's service life. This increases reliability and reduces maintenance costs. The thermostat is equipped with an anti-stop function, which protects the pump outside the heating season - it runs the pump for 15 seconds every 15 days - and a frost protection function - if the temperature drops below 5 °C, the pump switches on. 

Technical data:

• Supply voltage: 230V 50Hz  ±10% 
• Ambient temperature: -10...+50 °C 
• Switching current: 6A
• Temperature measuring range: 0...90 °C
• Temperature setting range: 5...80 °C
• Maximum sensor temperature: -10...120 °C 
• Sensor length: 1.2 m

Frequently Asked Questions

• How exactly does a manual (simple) thermostat work? It measures the temperature at its installation location and, when it drops below the set value, closes a contact that starts the heat source (boiler, pump, heating element) - once the set temperature is reached, the contact opens again. Unlike programmable thermostats, it has no weekly or daily program; the temperature is set manually using a rotary or sliding control.
• Where should the thermostat be placed? In a location that best represents the normal room temperature - away from direct sunlight, draughts, radiators or other heat/cold sources that could distort the measurement.
• Must installation be carried out by an electrician? Connecting the thermostat to the electrical circuit of the heat source should be carried out by a person with electrotechnical qualification, since it involves work on the electrical installation and load switching.