DTron2 is a range of 7" electronic submersible pumps with multiple impellers.
They are designed for pumping clean water from wells, pits and tanks. Can be used fully or partially submerged, or for surface pumping (with suitable accessories). Suitable for domestic use
for pressure boosting, rainwater reuse, gardening and irrigation. The pump can also be installed horizontally.
Also available in an X version with a 1" inlet and in an X kit, which includes a 1-metre suction hose and a float preventing intake of debris from the bottom. The whole pump has an IP68 protection rating. Using the DOC68 accessory (on request), it can be used both as a surface pump with IP68 protection and submerged under the water surface.
The pump includes a built-in expansion tank, so no external expansion tank is required.

• Operating range: flow up to 7.2 m³/h with head up to 45 m
• Pumped liquid type: clean, free of solid or abrasive particles, non-viscous, non-aggressive, non-crystallising, chemically neutral
• Solids passage: 2 mm
• Minimum suction depth: 110 mm
• Minimum liquid level: 35 mm
• Liquid temperature range: from +0 °C to +50 °C
• Minimum and maximum ambient temperature: < 0 °C / +50 °C
• Max. submersion depth: 15 m
• Set pressure: 2.4 bar (±0.2)
• Flanged/threaded connection: 5/4" threaded
• Maximum pump diameter: 185 mm
• Impeller material: technopolymer/ AISI 304 stainless steel
• Maximum number of starts: 60/h
• Continuous operation: yes
• Protection rating: IP68
• Motor insulation class: F
• Supply cable (m), plug: 10/15 m with plug
• Single-phase power input: 230 V 50 Hz
• Possible installation methods: fixed, horizontal or vertical. Submerged or partially submerged. Can be installed on the surface, below the water level, or after installing the DOC68 accessory outdoors in a vertical position (not included). Special version on request: X version with a suction kit for higher above water level. Version for surface installation (requires the DOC68 accessory).