Submersible sewage pumps for pumping waste water from sewer systems in commercial premises or on construction sites. The pumps are certified to the EN12050-2 standard for waste water. The pumps are suitable for fixed installations with a lifting device, or as portable units when placed on the bottom of the tank itself. These pumps have a channel impeller, a 50 mm free passage and an anti-clogging system. They are suitable for waste water without long fibres, rain water and ground water. The pumps are suitable for pumping in environments exposed to flooding or wherever high flow rates are required. Double mechanical seal made of silicon carbide in an oil chamber, which is not in contact with the pumped liquid. Motor shaft made of AISI 304 stainless steel, cable gland sealed in resin, the power cable is fitted for quick disconnection. Thanks to its small dimensions and both flanged and threaded discharge connections, it is ideal as a replacement for other manufacturers' pumps. The pumps are designed for fast maintenance thanks to a constructive solution that provides easy access to the main pump components. Single-phase versions with an integrated capacitor, available with a float switch for automatic operation (MA) with output up to 1.5 kW. For three-phase versions, protection is the responsibility of the user. An ATEX version is available for use in explosive atmospheres. ATEX certification: II2G Ex db IIB T4 GB or IEC EX: Ex db IIB T4 Gb). available with a float switch for automatic operation (MA) with output up to 1.5 kW. For three-phase versions, protection is the responsibility of the user. An ATEX version is available for use in explosive atmospheres. ATEX certification: II2G Ex db IIB T4 GB or IEC EX: Ex db IIB T4 Gb). available with a float switch for automatic operation (MA) with output up to 1.5 kW. For three-phase versions, protection is the responsibility of the user. An ATEX version is available for use in explosive atmospheres. ATEX certification: II2G Ex db IIB T4 GB or IEC EX: Ex db IIB T4 Gb).

• Operating range: flow rate up to 71.4 m3/h with head up to 19.3 m
• Pumped liquid: contaminated water, rain water and sandy site water, etc.
• Solids passage: up to 50 mm
• Liquid temperature range: up to +50 °C (+60 °C for a short time) +40 °C for the ATEX version
• Flanged and threaded connection: from 2”, DN 50, DN 65
• Impeller type: channel
• Protection rating: IP 68
• Motor insulation class: F
• Maximum dry-run time: 10 min
• Possible installation type: portable, fixed with coupling
• Special version on request: various cable lengths, voltage and frequency