Euroster 11 B
Code: EUROSTER 11 BProduct detailed description
Euroster 11 B, programmable thermostat for controlling a system with a DHW tank and pump
Euroster 11 B is used in central heating systems with DHW tanks. Designed for the DHW pump.
Two water temperature sensors prevent the water in the DHW tank from cooling down when the boiler is switched off. AntyStop function and cooling prevention function.
Technical parameters for EUROSTER 11 B :
Designed for : DHW pump
Power source : 230 V 50 Hz
Rated output load : 3 A 230 V 50 Hz
Rated power consumption : 1.6 W
Temperature measuring range : + 0 ° C ... + 110 ° C
Temperature control range : + 10 ° C ... + 70 ° C
Temperature control accuracy : 1 ° C
Temperature control hysteresis : 2 ° C - 10 °C
Operating temperature range : + 5 ° C ... + 40 ° C
Storage temperature range : 0 ° C ... + 65 ° C
IP rating : IP 40
Colour : black
Mounting : wall-mounted
Weight (controller with cables) : 0.62 kg
Certificates / standards : complies with EMC and LVD directives
Dimensions (W x H x D) mm : 150/90/52
Package contains Euroster 11B controller, wall plugs, instructions, sensor, mounting template
Frequently Asked Questions
- How exactly does a manual (simple) thermostat work? It measures the temperature at its installation location and, when it drops below the set value, closes a contact that starts the heat source (boiler, pump, heating element) - once the set temperature is reached, the contact opens again. Unlike programmable thermostats, it has no weekly or daily program; the temperature is set manually using a rotary or sliding control.
- Where should the thermostat be placed? In a location that best represents the normal room temperature - away from direct sunlight, draughts, radiators or other heat/cold sources that could distort the measurement.
- Must installation be carried out by an electrician? Connecting the thermostat to the electrical circuit of the heat source should be carried out by a person with electrotechnical qualification, since it involves work on the electrical installation and load switching.
Additional parameters
| Category: | pump and boiler room thermostats |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.7 kg |
| EAN: | 5906485706664 |
| EAN: | 5906485706664 |
| Rozmer balenia (mm): | 70/230/170 |
Product rating
Be the first who will post an article to this item!
Discussion
List of discussions
J
Jaroslav
Jaroslav
Dobrý deň, je možné použiť EUROSTER 11 B na ovládanie čerpadla laddomatu akumulačnej nádoby? Jedná sa o to , že teplota kotla a plne nabitej nádoby môže dosiahnuť aj 90°c , čo je pravdepodobne mimo rozsah regulácie. Prípadne akú reguláciu navrhujete? Ďakujem.
A
ATRIA.SK
ATRIA.SK
Dobrý deň,
na Vašu otázku žiaľ nepoznáme odpoveď.
Pekný deň.
S
Sergej
Sergej
Dobry den prajem. Rad by som sa opytal ci mate v ponuke zariadenie s dvoma teplotnymi cidlami, ktore dokaze ovladat obehove cerpadlo. Potrebujem aby sa carpadlo zaplo ak teplota na cidle dva T2 je vacsia ako teplota na cidle jeden T1 T1 je teplota v zasobniku a T2 na streche Dakujem za radu Idealne 12 V
A
Atria.sk
Atria.sk
Dobrý deň,
skúste si pozrieť https://www.atria.sk/avansa-110-s/
Pekný deň.