Euroster 11 M
Code: EUROSTER 11 MProduct detailed description
Euroster 11 M - programmable thermostat for heating systems with a circulation pump and three-way valve
Euroster 11 M is designed to control the actuator of the central heating mixing valve and the circulation pump.
It maintains the central heating temperature at the preset level, or checks the correctness of the set temperature of the circulated water. It monitors the supplied temperature. It cooperates with a room thermostat. Anti-Stop function.
Technical parameters:
Designed for: heating systems with a three-way valve, central heating pump
Power source: 230 V 50 Hz
Rated output load: 3 A 230 V 50 Hz
Rated power consumption: 1.6 W
Temperature measuring range: + 0 °C ... + 110 °C
Temperature control range: + 25 °C ... + 70 °C, or + 10 °C ... + 70 °C (central heating temperature control mode)
Temperature control accuracy: 1 °C
Temperature control hysteresis: 2 °C - 10 °C
Operating temperature range: + 5 °C ... + 40 °C
Storage temperature range: 0 °C ... + 65 °C
IP rating: IP 40
Colour: black
Mounting: wall-mounted
Weight (controller with cables): 0.76 kg
Certificates / standards: complies with EMC and LVD directives
Dimensions (W x H x D) mm: 150/90/52
Package contains: Euroster 11B controller, wall plugs, instructions, sensor, mounting template
Frequently Asked Questions
- How exactly does a manual (simple) thermostat work? It measures the temperature at its installation location and, when it drops below the set value, closes a contact that starts the heat source (boiler, pump, heating element) - once the set temperature is reached, the contact opens again. Unlike programmable thermostats, it has no weekly or daily program; the temperature is set manually using a rotary or sliding control.
- Where should the thermostat be placed? In a location that best represents the normal room temperature - away from direct sunlight, draughts, radiators or other heat/cold sources that could distort the measurement.
- Must installation be carried out by an electrician? Connecting the thermostat to the electrical circuit of the heat source should be carried out by a person with electrotechnical qualification, since it involves work on the electrical installation and load switching.
Additional parameters
| Category: | pump and boiler room thermostats |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.9 kg |
| EAN: | 5906485706794 |
| EAN: | 5906485706794 |
| Rozmer balenia (mm): | 70/230/170 |
Product rating
Be the first who will post an article to this item!
The average product rating is 5,0 out of 5 stars.
1 rating
5
4
3
2
1
Leave a rating
List of ratings
Discussion
List of discussions
P
Peter
Peter
Dobrý deň, Chcem sa spýtať či náhodou nemáte regulátor na ústredné kúrenie. Potrebujem regulovať 2 okruhy kúrenia plus okruch vykurovania TUV. Viete mi niečo odporučiť? S pozdravom Peter
A
ATRIA.SK
ATRIA.SK
Dobrý deň,
skúste si pozrieť toto, či by Vám to vyhovovalo.
https://www.atria.sk/euroster-uni3/. Pekný deň.
M
Michal
Michal
Dobrý den, doma používám Euroster 11 M.
Mužete mi poradit jaky výrobek Euroster má i venkovní čidlo ve smyslu Ekvitermní regulace a lze si nastavovat teplotu topně vody závislosti na venkovní teplotě
Děkuji za odpověd
A
ATRIA.SK
ATRIA.SK
Dobrý deň,
https://www.atria.sk/regulacia-adex-comfort-r/. Pekný deň.
M
Michal
Michal
Dobrý deň , chcel by som sa spýtať či bude fungovať euroster 11M so WOMIX Servopohnon MP-10 nakolko je použitý 3 cestný zmiešavací ventil od značky womix.Ďakujem
A
ATRIA.SK
ATRIA.SK
Dobrý deň,
mrzí ma to, ale nevieme, nakoľko WOMIX servá nepredávame.
Pekný deň.
V
Vladimír
Vladimír
M
Marek
Marek
Zdravím dá sa k tomuto termostat zapojiť Servopohon ESBE ARA661 230 V, tak aby regulovať trojcesni ventil, lebo ja mam aj akumulačné nádobu 1000l, ďakujem, a ostane program uložený keď sa vypne termostat celkom?
A
ATRIA
ATRIA
Dobrý deň, áno servopohon je možné k tomuto termostatu zapojiť. Po vypnutí termostatu zostane program uložený. Pekný deň.
