Protherm Tiger Condens 18/25 KKZ 42
Code: 0010017350Related products
Product detailed description
Protherm Tiger Condens 18/25 KKZ 42
- wall-mounted condensing boiler with a built-in storage tank
- storage tank volume: 42 l
- output: 4,9 - 18,1 kW
Tiger Condens is an excellent choice for households with high demands for thermal comfort and hot water supply. The boiler has a high output and unique capabilities for hot water preparation – with a flow rate of up to 23 litres of hot water per minute. It also ensures very fast reheating of hot water in the tanks once they have been emptied - around 5 minutes. The boiler uses condensing technology and so consumes far less energy than conventional boilers and produces fewer pollutants released into the air.
- stainless steel condensing heat exchanger,
- all components housed in a single, insulated and soundproof box,
- exceptional hot water supply comfort through built-in stainless steel storage tanks with layered hot water storage - using ISODYN 2 technology,
- efficient and comfortable heating thanks to condensing technology, wide output modulation range,
- weather-compensated control*
- simple and convenient control via a clear backlit LCD display
- modern self-diagnostic system
- low CO2 and NOx emissions
* The outdoor temperature sensor is not included with the boiler.
- Constant comfort at the lowest operating costs, thanks to exceptional performance.
- Always works reliably even at the lowest output (minimum output is 5 kW), which effectively reduces carbon dioxide and nitrogen oxide emissions.
- Low installation space requirements, since the hot water storage tank is located directly in the boiler.
- Weather-compensated control with eBUS controllers.
- Adapted for underfloor heating.
- The outdoor sensor and the Thermolink P/RC room controller allow a high level of comfort to be maintained at the lowest possible cost.
| Tiger Condens 18/25 KKZ 42 | |
| Heating | |
| Energy class for heating | A |
| Output at a temperature difference of 80/60°C | 4,9 - 18,1 kW |
| Output at a temperature difference of 50°C/30°C | 5,4 - 19,6 kW |
| Fuel | natural gas / propane |
| Standardised utilisation rate at 40/30°C | max. 108,4 % |
| Adjustable heating water (HW) temperature range | 10 - 80 °C |
| Max. working pressure | 300 kPa |
| Heating water expansion vessel | 12 l |
| Flue gas exhaust | turbo |
| Hot water heating | |
| Energy class | A |
| Output for hot water heating | 5,1 - 25,5 kW |
| Hot water tank volume | 42 l |
| Adjustable hot water temperature range | 45 - 65 °C |
| Maximum hot water pressure | 1 MPa |
| Specific hot water flow rate | 18,5 l / min |
| Hot water expansion vessel | 2 l |
| Electrical parameters | |
| Voltage/frequency | 230 V/50 Hz |
| Maximum electrical input | 134 W |
| Standby input | 5,4 W |
| Electrical protection [IP] | IPX4D |
| Dimensions | |
| Dimensions (width/height/depth) | 470/ 892/ 502 mm |
| Weight without water | 63 kg |
Additional parameters
| Category: | older versions |
|---|---|
| Warranty: | 3 years |
| Weight: | 67 kg |
| Automatic diagnostic system: | yes |
| Safety thermostat: | yes |
| CE number: | 1312BV5392 |
| Included accessories: | power cable, siphon, manual, warranty card |
| Electrical class: | I |
| Electrical protection rating: | IPX4D |
| Electronic ignition: | Yes |
| Electronics: | eBus 2.0 (od verzie 2014) |
| ? Expansion vessel: | 12 l |
| Expansion tank: | 2 l |
| Weight of empty boiler: | 63 kg (bez vody) |
| Flue gas CO value: | 98 ppm / 105 mg/kWh |
| Flue gas CO2 value: | 105 % |
| Current intensity: | 0,75 A |
| Country of origin: | EU |
| Summer mode: | Yes |
| Maximum working pressure: | 300 kPa |
| Maximum DHW pressure: | 1 mPa |
| Condensate quantity: | 1,7 l/hod |
| Two-point control option: | no |
| Pump output adjustment option: | Yes |
| Option to convert to LPG: | Yes |
| Option to operate without a thermostat: | Yes |
| Option to connect a wireless thermostat: | Yes |
| Option to connect solar: | no |
| Storage tank connection option: | no |
| Extended warranty option: | yes |
| Boiler output adjustment option: | yes |
| Gas supply pressure: | 20 mbar/ 0,002 MPa, 37 mbar/ 0,0037 MPa |
| Voltage/frequency: | 230V/50Hz |
| Adjustable DHW temperature range: | 45 - 65 °C |
| Adjustable heating water temperature range: | 10 - 80 °C |
| Standard efficiency rate at 40/30°C: | max. 108,4 % |
| Storage tank volume for hot water heating: | 42 l |
| Recommended heating filter: | Total filter 3/4" |
| Recommended controller: | Protherm Thermolink P 2 |
| Recommended solar set: | HEWALEX |
| Fuel: | natural gas / propane |
| Fuse: | 2 A |
| Flue design: | TURBO |
| Power output curve: | modulated |
| Power input: | 134 W |
| Electrical voltage connection: | 230V/50Hz |
| Concentric flue connection: | yes |
| Separate flue connection: | yes |
| DHW connection port: | 1/2" |
| Water connection port: | 3/4" |
| Propane G31 - gas flow at maximum output in DHW mode: | 1,98 kg/h |
| Propane G31 - gas flow at maximum output in heating mode: | 1,44 kg/h |
| Propane G31 - gas flow at minimum output: | 0,40 kg/h |
| Dimensions: | 470x892x502 mm |
| Boiler commissioning: | by a Protherm service technician |
| Specific DHW flow rate: | 18,5 l/min |
| Boiler intended use: | with the option to connect a storage tank, with an integrated storage tank |
| Weighted NOx value: | 22,0 ppm / 39,9 mg/kWh |
| Permanent pilot flame: | no |
| DHW tank size: | 42 l |
| Suitable for underfloor heating: | yes |
| Output when heating DHW: | 5,1 - 25,5 kW |
| Output at temperature drop 50/30°C: | 5,4 - 19,6 kW |
| Output at temperature drop 80/60°C: | 4,9 - 18,1 kW |
| DHW output: | 5,1 -25,5 kW |
| Built-in water filter: | no |
| Natural gas G20 - gas flow at maximum output in DHW mode: | 2,70 m3/h |
| Natural gas G20 - gas flow at maximum output in heating mode: | 1,96 m3/h |
| Natural gas G20 - gas flow at minimum output: | 0,54 m3/h |
| Product replaced by new one: | https://www.atria.sk/protherm-tiger-condens-20-26-kkz-42/ |
| The item has been sold out… | |
-
Certificate Tiger Condens
-
User Manual
-
Connection Dimensions
-
Design Documentation
-
Tiger Condens Brochure (671.2 kB)
-
Brochure (1.1 MB)
Product rating
Be the first who will post an article to this item!
Discussion
List of discussions
Marek
ATRIA.SK
Jozef
Dávid
Miroslav
Atria.sk
František
Atria.sk
Juraj
Atria.sk
Miloš
Atria.sk
Teodor
ATRIA
Teodor
ATRIA
Juraj
ATRIA
Patrik
ATRIA
O spoločnosti
Spoločnosť Protherm Production patrí do koncernu Vaillant Group a je výrobcom vykurovacej techniky pre mnohé krajiny Európy, Ázie i Afriky. Pre slovenský trh produkuje kotly značiek Vaillant a Protherm. Protherm Production nie je len výrobným závodom. Jeho súčasťou je aj najmodernejšie vývojové centrum, testovacie centrum a distribučno-logistické centrum pre strednú a východnú Európu.
Začiatky spoločnosti siahajú do roku 1991, kedy pôsobila ako predajca vykurovacej techniky v Prahe. Výroba v Skalici bola spustená najprv v spoločnosti Didaktik, odkiaľ bola v roku 1999 presťahovaná do priestorov súčasného závodu. Od roku 2001 sa stala súčasťou nemeckého koncernu Vaillant Group.
Tri slovenské subjekty: Koncern Vaillant Group na Slovensku zamestnáva viac ako 1 800 ľudí. Okrem závodu v Skalici mu patrí aj spoločnosť Vaillant Industrial Slovakia v Trenčianskych Stankovciach, vyrábajúca hydromoduly a rúrky. Predajnou organizáciou pre slovenský trh je spoločnosť Vaillant Group Slovakia, ktorá zabezpečuje i ďalšiu starostlivosť o zákazníka a servis ponúkaných výrobkov.
Koncern Vaillant Group má vyše 140-ročnú históriu a na konte viac ako 2 000 patentov. Je lídrom a priekopníkom v oblasti vykurovacích technológií v Európe. Vo svete má 10 výrobných závodov (osem v Európe, po jednom v Turecku i v Číne) a viac než 12 000 zamestnancov. Vyrába zariadenia značiek Vaillant, Protherm, Saunier Duval, Bulex, AWB, DemirDöküm, Glow-Worm a Hermann.
Míľniky v Protherm Production2017 – Rekord: vyrobených pol milióna produktov za rok 2017
2016 – Otvorenie nového návštevníckeho centra
2015 – Otvorenie nového testovacieho centra
2013 – Vznik centrálneho logistického skladu East Hub
2011 – Odštartovala výroba závesných nekondenzačných kotlov
2005 – Špecializácia na všetky stacionárne kotly
2001 – Začlenenie do nemeckého koncernu Vaillant Group
2000 – Začiatok výroby s tromi montážnymi linkami
Výroba
Spoločnosť Protherm Production vyrába široký sortiment kotlov a zariadení na ohrev teplej vody. Ide o závesné a stacionárne, kondenzačné aj nekondenzačné kotly, elektrokotly, elektrické ohrievače na prípravu teplej vody i vnútorné jednotky tepelných čerpadiel. V závode v Skalici vznikajú produkty značiek:
V Protherm Production sú používané najmodernejšie elektronické pracovné postupy, vďaka ktorým sa vykurovacie zariadenia na linkách montujú pomerne ľahko. Pracovný postup na LCD obrazovkách sprevádza zamestnancov celým procesom montáže, v textovej aj obrazovej forme. Tento inteligentný elektronický systém uľahčuje výrobu a pomáha vyhnúť sa chybám. Pri nesprávnom použití súčiastky nás upozorní a zastaví montáž produktu na linke.
Výrobné haly závodu v Skalici sú svetlé, čisté a nehlučné priestory. Cieľom Protherm Production je stať sa zelenou výrobou, preto investuje nemalé finančné prostriedky do ekologických riešení, inovácií a sústreďuje sa na šetrenie energie.