Stiebel Eltron PSH 50
Code: 231151Related products
Product detailed description
Stiebel Eltron PSH 50 Universal EL
- replacement for Tatramat EO 50 EL
- electric wall-mounted water heater with fast heating and electronic regulation
- volume: 50 litres
- output: 2 - 3 kW
Wall-mounted pressurized storage water heater with an enamelled steel tank in a square design. Its stainless steel flange with heating element is fitted with magnesium anti-corrosion protection.
Appliance is controlled by electronic regulation. The electronics feature three ECO programmes ensuring energy savings, plus other features such as: frost protection, maximum temperature limitation and fast heating. Using the electronics, the temperature can be adjusted continuously from 7 up to 85 °C. The heater is designed for vertical installation.
Easy installation, control and maintenance
- universal bracket
- option to install above a bathtub
- the most modern design with intuitive controls
- option to set the optimal heating temperature
Multi-stage protection
- protection against freezing of the water
- protection against overheating of the heater with reset function
- function maximum temperature limitation
- safe button lock to prevent unwanted operation (child lock)
- protection rating IP25
Long service life
- stainless steel flange with a stainless steel heating element
- special enamel CoPro - double-sided enamelling
- anode protection against corrosion
User comfort
- fast-heating function for especially fast heating
- option selection of operating mode (single-shot heating, single-circuit or dual-circuit operating mode)
- function feedback control for efficient use of the low (off-peak) tariff
- backlit display
The latest generation of intelligent electronics
- three-stage energy-saving function
- function ECO Comfort
- function ECO Plus
- function ECO Dynamic
Economy and low energy consumption
- thermal polyurethane insulation
- electronic regulation
Description and dimensions
DescriptionDimensions
| Description | Dimensions |
| 1. Outlet pipe | A = 380 mm |
| 2. Outlet pipe | B = 951 mm |
| 3. Temperature indicator | C = 80 mm |
| 4. Electronic control | D = 705 mm |
| 5. Anode | E = 78,5 mm |
| 6. Heating element | F = 20 mm |
| 7. Universal bracket (Accessory) | G = universal bracket (Accessory) |
| Parameters | PSH 50 | |||
|---|---|---|---|---|
| Nominal volume (l) | 50 | |||
| Heating method | electric | |||
| Version | pressurized | |||
| Nominal tank overpressure (MPa) | 0,6 | |||
| Electrical connection | 1/N/PE ~ 230 V | |||
| Power input (kW) | 2/3 | |||
| Amount of 40 °C mixed water (l) | 100 | |||
| Approx. electric heating time from 15° to 65 °C at 3 kW input (min) | 53 | |||
| Heat losses (kWh/24h) | 0,69 | |||
| Weight (kg) | 25 | |||
| Electrical protection rating | IP 25 | |||
| Energy efficiency class | B | |||
| H x W x D (cm) | 93,1 x 38 x 38 | |||
Frequently Asked Questions
- What tank volume should I choose? A common consumption estimate is roughly 40-50 litres of hot water (at about 40-45 °C) per person per day under standard use (showering, washing); if you take baths or have more bathrooms/outlets, plan for a larger volume. When choosing, also consider whether the tank will be reheated by a high-output boiler (faster heating, a smaller volume may be enough) or, for example, only by a solar system (in which case a larger volume is actually worth it for storing heat during the day).
- Can I connect this TATRAMAT tank to my existing boiler? In most cases yes, but you should check the compatibility of the hydraulic connection (dimensions and type of fittings) and whether your boiler supports controlling the tank's heating (a temperature sensor in the tank and possibly a diverter valve are required) - you'll find these details in the product's technical parameters, or our customer service can advise you.
- Where and how is the tank installed? The tank is placed as close as possible to the heat source (boiler) to minimise heat losses in the connecting pipework, while still leaving enough space around it for service access (anode replacement, safety valve inspection).
- Does installation have to be done by a professional? We always recommend leaving the hydraulic connection to the water supply and the heat source, including fitting a pressure-rated safety valve, to a qualified heating engineer/installer - an incorrectly fitted or missing safety valve is a safety risk.
Additional parameters
| Category: | Quick-Heat Water Heaters |
|---|---|
| Warranty: | 2 years |
| Weight: | 28 kg |
-
(548 kB) Technical Data Sheet
-
(16,25 MB) Instructions for Use
-
(65 kB) Energy Label and Data Sheet
-
(70 kB) Declaration of Conformity
-
(302 kB) Certificate (165 kB)
-
(302 kB) Certificate (165 kB)
-
(302 kB) Certificate (756.1 kB)
Product rating
Be the first who will post an article to this item!
Discussion
List of discussions
R
rado
rado
ZDRAVIM VAS,JEDNA SA O BOJLER Tatramat EO 50 EL SME TRAJA DOSPELI,VANU NEMAME LEN SPRCHOVACI KUT OTAZKA ZNIE STACIL BY NAM TENTO 50L BOJLER?DRUHA OTAZKA BOJLER MA BYT STALE V ZASUVKE,ALEBO JE NUTNE HO VYPINAT OBCAS
A
atria
atria
Dobrý deň, 50 litrový bojler by Vám nestačil. Trojčlenná rodina, aj keď nemáme vaňu, len sprchovací kút potrebuje aspoň 100 až 120 litrový bojler. Bojler môžte mať stále v zásuvke, netreba ho vôbec vypínať. Jedine ak pôjdeme na dlhšiu dobu preč (dovolenka) , tak ho môžte vypnúť. Prajem Vám pekný zvyšok dňa.
B
bern
bern
Prosim o radu. Chcela by som vymenit bojler. Momentalne mam ariston 220 lt (velmi predimenzovany, nakolko sme domacnost 1,5 cloveka). Uvazujem o : Ariston premium 50l / Tatramat Eo 50 El. Ktory by ste mi doporucovali ? Este poznamka. Cez bojler doplnat /v pripade potreby/ vodu do vykurovacieho systemu. Dakujem.
L
lubos
lubos
Dobrý deň Rád by som sa informoval ohladom ohrievača vody Tatramat EO 50 GL. Prestal fungovať t.z, nesvieti ani kontrolka a ani nehreje. Viete mi poradiť? Je možne v krajnom prípade zohnat ho alebo nejakú náhradu ale mala by mať také isté rozmery. Ďakujem pekne