Vaillant Distance Holder Ø 200 mm (10 pcs)

Product detailed description

A large pack of 10 distance holders Ø 200 mm is designed for more demanding installations of the Vaillant DN 200 PP flue system - long vertical runs in multi-storey shafts, cascade sets of several ecoCRAFT exclusiv boilers with a common flue gas manifold, or as a stock reserve for installation and service companies carrying out multiple projects with this system.

The Vaillant DN 200 PP flue system is an original component system for exhausting flue gases from large-capacity condensing boilers of the ecoCRAFT exclusiv series (and in some projects also from cascade sets of several Vaillant condensing boilers connected to a common flue gas manifold). It is a single-wall plastic pipe made of durable polypropylene (PP), which - given the low flue gas temperature of condensing technology (typically up to approx. 80 °C) - is a fully valid and more cost-effective alternative to metal stainless steel flues used with older atmospheric or low-efficiency heat sources. By purchasing a larger pack at once, you avoid having to repeatedly order individual pieces during a larger project and at the same time achieve a better price per piece compared to packs of 1 or 4 pieces.

Technical Characteristics

• Material - stainless steel resistant to moisture and flue gas condensate
• Nominal diameter - DN 200, exactly for ecoCRAFT exclusiv piping
• Pack - 10 pcs per pack
• Manufacturer order number - 0020106436
• Fastener type - clamp holder with a mounting ear for screw fixing
• Recommended use - long multi-storey runs, cascade sets, stock reserve for installation companies
• Compatibility - exclusively for the DN 200 PP system

Installation and Use in the Flue Run

For long vertical runs in multi-storey shafts or when connecting several ecoCRAFT exclusiv boilers in a cascade to a common flue gas manifold, a significantly higher number of distance holders is needed than for a standard single-storey installation. A pack of 10 pieces will cover most such projects without the need to combine several smaller packs. The exact number and spacing of holders (typically in the order of 1.5 - 2 m on a vertical section, plus additional pieces at bends and branches) is determined by the flue gas path design; installation should only be carried out by a professionally qualified company authorized to install flue systems for condensing technology. For multi-storey runs, we recommend dividing the installation by floor and checking the pipe's verticality and stability after each section before continuing to the next floor, so that any inaccuracy does not accumulate over the entire height of the run.

Compatibility and System Fit

This large-volume pack is fully compatible with all parts of the DN 200 PP system listed in the overview table below - bends, straight pieces, extensions, and inspection elements. It is also suitable as additional material for service interventions, when several old or damaged holders need to be replaced at once during a single technician visit, saving both time and the cost of repeated call-outs. As with smaller packs, these holders are not interchangeable with holders for other diameters of Vaillant flue systems, such as DN 110/160 mm for residential condensing boilers ecoTEC plus or DN 130 mm for smaller cascade sets.

Material Planning for Large Projects and Cascade Boiler Rooms

When implementing boiler rooms with a cascade connection of several ecoCRAFT exclusiv boilers to a common flue gas manifold, or for projects with long runs in tall buildings (apartment buildings, office buildings, industrial halls), precise planning of the required material is key to a smooth installation process without unnecessary downtime waiting for missing parts. A large-volume pack of 10 distance holders significantly simplifies material calculation for such projects - instead of counting and ordering dozens of individual pieces, you only need to calculate the required number of packs and order them at once.

In cascade sets, it is common for individual boilers to have their own connecting pipe to the common manifold, which in practice means several shorter and longer sections at the same time. This often results in an uneven material requirement at different points of the boiler room, which a large-volume pack solves better than several smaller packs - leftover pieces from one section can simply be used elsewhere on the same job without having to buy additional small packs.

For installation companies carrying out several similar projects during the year, we recommend keeping this large pack in stock on an ongoing basis - stainless steel distance holders have practically unlimited shelf life under normal storage conditions and are not at risk of material degradation like some rubber seals or adhesives.

When handing over the work to the investor or when taking over the building for use, proof of origin and type of material used on the flue gas path is increasingly required, especially for larger commercial or residential buildings subject to stricter fire and inspection regulations. Purchasing the entire required quantity of original Vaillant parts at once from a single supplier - including this large-volume pack of distance holders - also simplifies subsequent proof of material origin with a single invoice, which is particularly appreciated during final inspection or handover of the work to the client.

For large projects, we recommend discussing the required amount of material with our team before starting installation - based on the number of boilers in the cascade, the height of the building, and the shaft routing, we can help you estimate the approximate number of other DN 200 PP system parts (bends, extensions, inspection elements) needed, so that you have the complete material available for a single installation visit and avoid unnecessary downtime waiting for missing components.

As with smaller packs, the large-volume pack is also an original part directly from the manufacturer Vaillant - not a universal replacement of another brand. This is particularly important for larger projects, where the investor or the general contractor may require proof of origin and conformity of all flue gas path components used with the boiler's certification.

Maintenance, Service and Inspection

As with smaller packs, these holders do not require ongoing maintenance. However, for larger installations with dozens of meters of run, a thorough annual inspection by a chimney sweep or service technician is even more worthwhile - for long runs, the probability of at least one loose or mechanically damaged holder is logically higher, which is why it is advisable to keep spare pieces in stock for immediate replacement without waiting for delivery. For cascade boiler rooms with a service contract, we recommend including the inspection of all distance holders directly in the scope of the regular annual service inspection, so that any loosening is detected in time, regardless of whether someone notices it during a routine visual inspection of the boiler room.

Why Choose an Original Vaillant Part

For installation and service companies carrying out installations of ecoCRAFT exclusiv boilers or their cascade sets, the large pack represents a practical and economical choice - it reduces the number of orders, simplifies logistics on site, and guarantees that all holders used come from the same original Vaillant production batch with identical material properties. This is particularly important for projects where the investor or designer requires uniform documentation of the material used on the entire flue gas path. As a verified supplier of original Vaillant parts (WINTNER s.r.o.), we can guarantee the origin and quality of every piece in the pack and, if necessary, provide the required documentation for the material.

Overview of the Complete Vaillant DN 200 PP System

Below you will find an overview of all parts of the DN 200 PP flue system currently available on atria.sk, so you can easily assemble a complete flue run for your boiler or cascade of ecoCRAFT exclusiv boilers.

Frequently Asked Questions