Angle brass ball valve for manifold with 1" union nut + thermometer 0°C - 80°C, RED handle

Product detailed description

Angle brass ball valve for manifold with 1" union nut + thermometer 0°C - 80°C, RED handle

Angle ball valve made of brass, designed for fitting to a manifold with a 1" union nut. It includes a built-in thermometer with a range of 0 °C - 80 °C for checking the temperature of the heating/cooling water directly at the manifold.

What makes this valve stand out

• Instant temperature check - the built-in thermometer shows the water temperature without the need for additional measuring instruments.
• Quick circuit shut-off - the ball valve opens/closes with a single quarter-turn; compared to e.g. needle valves, operation is faster and more intuitive.
• Colour coding - the red handle clearly indicates which side of the manifold (supply/return) is open or closed during operation.

Technical parameters

• Material: brass
• Type: angle
• Connection: 1" with union nut
• Thermometer range: 0 °C - 80 °C
• Handle colour: red

Installation

The valve screws directly onto the end of the manifold (inlet or outlet) using a 1" union nut. Once fitted, connect the pipe from the heat source to the free side of the valve. We recommend fitting both valves (supply and return) at the same time, so the entire manifold can be easily shut off if needed.

Important when ordering

Ball valves are always fitted to the manifold in pairs - one on the supply and one on the return. You therefore also need to order a matching blue piece to go with this red one (the colour coding makes it easier to tell the supply and return apart). A T-KIT is also available with both colours in one package (1x blue + 1x red + 2x rubber seal).

Frequently asked questions

• Do I need to buy both valves at once? We recommend it - the manifold needs one valve on the supply and one on the return so you can shut it off completely.
• Is the thermometer included with the valve? Yes, the thermometer is already built in and ready to use.