IVAR.G2S, G24 - ball valves with pressure test point
Product sorting
List of products
Adapter for TESTO and SEITRON measuring instruments - 1/4"; including a threaded...
Ball gas valve G24 - with integrated pressure plug and union nut - 1"x5/4"; angled...
Gas ball valve G24 - with an integrated pressure test plug - 1"; angled in-line
Gas ball valve G24 - with an integrated pressure test plug - 1"; angled offset
Gas ball valve G24 - with an integrated pressure test plug - 3/4"; straight
Gas ball valve G24 - with an integrated pressure test plug a union nut - 1"x5/4";...
Gas ball valve G24 - with an integrated pressure test plug a union nut -...
Gas ball valve G24 - s integrovanou tlak. plug a union nut - 1"x5/4"; angled mimo os
Gas ball valve G24 - with an integrated pressure test plug a union nut - 3/4"x1";...
Listing controls
GAS BALL VALVE - WITH INTEGRATED PRESSURE TEST POINT
IVAR.G24, IVAR.G24-M, IVAR.G24-MR, IVAR.G24-MRR, IVAR.G24-R, IVAR.G24-RR, IVAR.G2S, IVAR.G2S-M, IVAR.G2S-MR, IVAR.G2S-MRR, IVAR.G2S-R, IVAR.G2S-RR
- PN 5, T = -20 °C to +60 °C
- ball valve with integrated pressure test point for measuring the operating overpressure
in the gas pipework and testing system tightness according to STN EN 1775/2008 and TPP 704 01 - type designation M - ball valve with union nut
- material brass
- G2S - can be locked and secured against unwanted manipulation
- G24 - TECOBLOCK® safety system against accidental opening
Note: No professional qualification for installation and repairs under Decree 508/2009 Coll., as amended, is required for removing the pressure test point, fitting the measuring adapter and connecting the measuring instrument, since the operation does not involve any gas leakage.
Frequently Asked Questions
- What is the integrated pressure test point used for? The pressure test point allows a measuring device to be connected without removing the valve, so that a pressure tightness test of the gas pipework can be carried out according to applicable regulations.
- What versions are available? The valves are supplied in straight and angle versions (in-line and off-axis), with a thread or with a union nut for a straightforward connection to a manifold or pipe.
- What is the range of connection sizes? Common sizes are 3/4" and 1", and in combination with a union nut also a transition to 5/4".