Brass nipple 1“
Code: 2520022Related products
Product detailed description
Brass nipple 1“ - external threads MM
- max. pressure up to 1.5 MPa
- max. temperature up to 110°C
A brass threaded nipple extends or connects two external threads, and is used, for example, to bridge the distance between two fittings. Brass is a long-proven, standard material for threaded water and heating installations thanks to its corrosion resistance and reliable tightness when the joint is properly tightened.
Frequently asked questions
- How do I choose the correct fitting size? The thread size (e.g. 1/2", 3/4", 1") must exactly match the thread size of the pipe or fitting you are connecting to - designations such as FF (female-female), MF (male-female) and similar abbreviations in the name indicate the type of thread on each side of the fitting.
- What do the abbreviations FF and MF in the name mean? F (female, internal thread) and M (male, external thread) indicate the type of thread on that side of the fitting - for example "FF" means an internal thread on both sides, while "MF" means an external thread on one side and an internal thread on the other.
- Do I need to use a sealing material during installation? Yes, a sealing material (e.g. PTFE tape or hemp fibre with sealing paste) is normally used on threaded joints to ensure a perfectly tight seal - the thread alone, without sealant, will not seal reliably.
- Does the installation have to be carried out by a professional? A simple threaded connection can be handled by a competent DIYer with basic skills, but when working on an already functioning system (especially a gas or pressurised water/heating installation) we recommend calling in a plumber, who will also check the tightness of the joint after installation.
- What material and pressure class does this fitting have? It is made of brass, suitable for standard water and heating installations - exact nominal pressure and temperature values (where specified for the particular product) can be found in the technical parameters above.
Additional parameters
| Category: | Nipples |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.1 kg |
Product rating
Be the first who will post an article to this item!
Discussion
List of discussions
T
Tibor
Tibor
Dobrý deň, mám prietokový plynový kotol s výstupmi 6/4". Chcem pripojiť 3 radiatory s bočnými prívodmi 1/2", do samospádového systému, pomocou Vášho trojcestného nerezového rozdelovača (vstup 1", 3 výstupy 3/4"). Napíšte mi prosím Váš názor. Ďakujem.
T
Tibor
Tibor
Dobrý deň, ďakujem za odpoveď. Podobný názor som už čítal na Vašich diskusiách, preto som si to chcel ešte raz overiť. Taký samospádový systém, ako som opísal vo svojej otázke, s tými istými radiátormi a s tým istým prietokovým plynovým kotlom mi realizovali kedysi, asi pred 20 rokmi, miestni inštalatéri. Ono to fungovalo, hrialo to, až dovtedy, kým sa mi výmenník v kotli neprederavil, na jar tohto roku. Zohnal som si ten istý typ kotla (DESTILA Ocelot) a chcem si to celé urobiť realizátorsky krajšie (bolo to urobené strašne škaredo ), s očakávaním, že mi to pôjde aspoň tak, ako doteraz. Nechcel by som si to komplikovať použitím čerpadla, pokiaľ to nebude nutné. Jedine, že by boli nejaké vážne dôvody. Ďakujem.
A
ATRIA
ATRIA
Dobrý deň. Myslím si, že to nebude dobre fungovať, tie radiátory majú len 1/2 pripojenie a vo vnútri taký malý otvor, že tu vodu to bude veľmi brzdiť, rozdeľovač sám o sebe tiež nebude fungovať na samotiaž. Jednoznačne uzatvoriť systém jedným čerpadlom. Pekný deň.