Cap 1/2" - DN15

Product detailed description

Brass cap 1/2" - for internal thread

it is used for blinding pipes or fittings with an external connection thread in drinking water, service water, central heating or underfloor heating systems with a processed pressure of up to 1.5 MPa and a temperature of up to 110°C
it is also possible to use for liquid substances whose properties do not disturb the basic material from which the lid is made and do not exceed the temperature and pressure conditions as established for water

Frequently Asked Questions

• How do I choose the correct fitting size? The thread size (e.g. 1/2", 3/4", 1") must exactly match the thread size on the pipe or fitting you are connecting to - dimension codes such as FF (female-female), MF (male-female) and similar abbreviations in the name indicate the thread type on each side of the fitting.
• What do the abbreviations FF and MF in the name mean? F (female, internal thread) and M (male, external thread) indicate the thread type on the given side of the fitting - for example, "FF" means an internal thread on both sides, "MF" an external thread on one side and an internal thread on the other.
• Do I need to use sealing material during installation? Yes, sealing material (e.g. PTFE tape or hemp fibre with sealing paste) is normally used on threaded joints to ensure the joint is perfectly leak-tight - the thread alone, without sealant, will not reliably seal.
• Must installation be carried out by a professional? A simple threaded connection can be handled by a competent DIY user with basic skills; however, when working on an already functioning system (especially gas or pressurised water/heating systems) we recommend calling in a plumber, who can also verify the joint is leak-tight after installation.
• What material and pressure class does this fitting have? It is made of brass, suitable for standard water and heating systems - exact nominal pressure and temperature values (where stated for the specific product) can be found in the technical parameters above.