Coupling piece, impeller and pressure disc are made of brass
Enclosed asynchronous motor cooled by external ventilation
Built-in thermal motor protection and capacitor on the single-phase version
For three-phase motors, suitable overload motor protection must be used
Protection class: IP44
Insulation class: F
Manufactured according to standard CEI 2-3 and CEI 61-69 (EN 60335-2-41)
Operating range: from 8 to 45 l/min with head up to 53 m
Liquid temperature range: from 0 °C to + 35 °C (EN 60335 -2 – 41 for domestic use), from -10 °C to + 80 °C (for other uses)
Pumped liquid: clean, free of solid and abrasive particles, non-aggressive, non-viscous, non-crystallizing, chemically neutral, with properties close to water
Maximum working pressure: 10 bar (1000 kPa)
Pumps KP 60/6M, KP 60/6T, KP 60/12 M, KP 60/12 T
Pump casing and impeller made of brass. Mechanical seal carbon/ceramic. Motor shaft made of stainless steel. Asynchronous motor cooled by external ventilation. Motor overload protection on the single-phase version (permanently connected capacitor). For three-phase motors, suitable overload motor protection must be used.
Protection class: IP44
Insulation class: F
Standard voltage: 1x230V 50Hz 3x230-400V 50Hz
Operating range: from 1 to 35 l/min with head up to 107 metres
Pumped liquid: clean, free of solid or abrasive particles, non-aggressive
Liquid temperature range: from 0°C to + 35°C for domestic use (EN 60335-2-41), from -10°C to + 80°C for other uses. Maximum ambient temperature: + 40°C
