KPS 30/16 T Peripheral pump

Product detailed description

KPS 30/16 T Peripheral pump

• Cast iron pump body
• Spacer, impeller and pressure disc made of brass
• Enclosed asynchronous motor cooled by external ventilation
• Built-in thermal motor protection and capacitor for the single-phase version
• For three-phase motors, a suitable motor overload protection must be used
• Protection rating: IP44
• Insulation class: F
• Manufactured according to standard CEI 2-3 and CEI 61-69 (EN 60335-2-41)
• Operating range: from 8 to 45 l/min with head up to 53 m
• Liquid temperature range: from 0 °C to +35 °C (EN 60335-2-41 for domestic use), from -10 °C to +80 °C (for other uses)
• Pumped liquid: clean, free of solid and abrasive substances, non-aggressive, non-viscous, non-crystallising, chemically neutral, with properties close to water
• Maximum working pressure: 10 bar (1000 kPa)

Pumps KP 60/6M, KP 60/6T, KP 60/12 M, KP 60/12 T

Pump body and impeller made of brass. Mechanical seal carbon / ceramic. Motor shaft made of stainless steel. Asynchronous motor cooled by external ventilation. Motor overload protection for the single-phase version (permanently connected capacitor). For three-phase motors, a suitable motor overload protection must be used.

• Protection rating: IP44
• Insulation class: F
• Standard voltage: 1x230V 50Hz 3x230-400V 50Hz
• Operating range: from 1 to 35 l/min with head up to 107 metres
• Pumped liquid: clean, free of solid or abrasive substances, non-aggressive
• Liquid temperature range: from 0°C to +35°C for domestic use (EN 60335-2-41), from -10°C to +80°C for other uses. Maximum ambient temperature: +40°C
• Maximum working pressure: 12 bar (1200 kPa)
• Installation: fixed, in a horizontal position.

Frequently Asked Questions

• How do I choose the right pump output/head? It must cover the pressure losses of your specific circuit (pipe length, number of fittings) - if in doubt, consult a heating engineer, who will size the pump precisely.
• Must installation be carried out by a professional? Fitting the pump into prepared pipework can be handled by a DIYer, but we recommend having the electrical connection and system balancing checked by a professional.