ELÍZ EHT 3.5
Code: ELZ_3277Product detailed description
The EHT model is an electric pressure-type instant water heater with hydraulic switching. Due to its design, it is intended for connection to only one point of use and universal installation below or above a washbasin / kitchen sink. If needed, the heater outlets can be rotated in any direction, both vertically and horizontally - 360° installation. The heater can be connected to both a pressurized and unpressurized water mixer tap. When installed under the sink - to a standard washbasin mixer tap. When installed above the sink, the heater can be mounted directly onto any sink mixer tap with an outlet spacing of 30 mm.
Water heating takes place at the moment water flows through the heater, so energy is consumed only during the water heating process. Thanks to using the heater directly at the point of use and short water pipe runs, heat losses are completely eliminated. EHT instant water heaters are not suitable for supplying a shower as the point of use. The ELÍZ EHT 3.5 instant water heater is supplied with an economical aerator insert (flow regulator), which allows you to achieve an optimal water temperature at an economical flow rate, especially at low cold water inlet temperatures. It is equipped with a thermal fuse against water overheating with a reset function.
Advantages and features:
- Power input: 3.5 kW
- Simple installation and connection
- Instant and continuous water heating
- Energy efficient - Energy class A
- Efficient hot water supply for a washbasin
- Hydraulic switching
- Withstands pressure up to 1.0 MPa
- Water outlets G3/8" M
- Distance between water outlets 30 mm
- Universal 360° installation below or above a washbasin / kitchen sink
- Can be connected to both a pressurized and unpressurized water mixer tap
- Installation under the sink - to a standard washbasin mixer tap
- Installation above the sink - installation on any sink mixer tap with an outlet spacing of 30 mm, or on hoses
- High-quality heating element with a long service life
- High safety and operational reliability
- Thermal fuse against overheating with reset function
- The heater is supplied with an economical aerator insert - flow rate 2 l/min
- Power cable with 230 V plug - length 0.7 meters
- Protection rating IP 25
Leaflet - EHT, ELX, Manual - EHT (SK/CZ)_v05/2021, Technical Data Sheet, Leaflet - advantages of instant water heaters
Additional parameters
| Category: | Pressurised Water Heaters |
|---|---|
| EAN: | 8588006687521 |
| type: | EHT 3.5 |
| power input: | 3500 W |
| voltage: | 230 V |
| fuse protection: | 16 A |
| electrical protection rating: | IP 25 |
| water connection: | 3/8 '' |
| maximum water working pressure: | 1.0 MPa |
| minimum water working pressure: | 0.1 MPa |
| hot water flow rate (Δt=25°C): | 2.0 l/min |
| hot water flow rate (Δt=35°C): | 1.3 l/min |
| switching water flow rate: | 1.3 l/min |
| safety fuse: | yes |
| wall installation: | yes |
| free-standing: | |
| product weight: | 1.5 kg |
| weight: | |
| product dimensions: | w / h / d: 186 x 135 x 87 mm |
| dimensions: height x width x depth: | |
| product warranty: | 2 years |
| efficiency: | |
| EAN: | 8588006687521 |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!