ELÍZ EHT 4.5
Code: ELZ_3278Product detailed description
The EHT model is an electric instantaneous water heater with pressure operation and hydraulic switching. Due to its design, it is intended for connection to only one draw-off point and universal installation below or above a washbasin / kitchen sink. If needed, the heater's outlets can be rotated in any direction, both vertically and horizontally - 360° installation. The heater can be connected to either a pressurized or non-pressurized water tap. When installed below a washbasin, it is connected to a standard washbasin faucet. When installed above a washbasin, the heater can be mounted directly onto any sink faucet with an outlet spacing of 30 mm. Water heating occurs the moment water flows through the heater, so energy is consumed only during the heating process. Thanks to using the heater directly at the draw-off point and short water pipe runs, heat losses are completely eliminated. An indicator light allows monitoring of the ongoing heating process. EHT instantaneous water heaters are not suitable for supplying a shower as a draw-off point. The ELÍZ EHT 4.5 instantaneous water heater is supplied with an economical aerator insert (flow regulator), the use of which achieves an optimal water temperature at an economical flow rate, especially at low inlet cold water temperatures. It is equipped with a thermal fuse against overheating of the water with a reset function. Advantages and features: Power input: 4.5 kW Simple installation and connection Instant and continuous water heating Energy efficient - Energy class A Efficient hot water supply for washbasins Hydraulic switching Resists pressure up to 1.0 MPa Water outlets G3/8" M Distance between water outlets 30 mm Universal 360° installation below or above a washbasin / kitchen sink Can be connected to either a pressurized or non-pressurized water tap Installation below a washbasin - onto a standard washbasin faucet Installation above a washbasin - onto any sink faucet with an outlet spacing of 30 mm, or onto hoses High-quality heating element with a long service life High operational safety and reliability Thermal fuse against overheating with a reset function Transparent indicator light for water heating The heater is supplied with an economical aerator insert - flow rate 2 l/min Power cable for 230 V, without a plug - length 0.8 meters Protection rating IP 25 Brochure - EHT, ELX, Manual - EHT (SK/CZ)_v05/2021, Technical Data Sheet, Brochure - benefits of instantaneous water heatersAdditional parameters
| Category: | Pressurised Water Heaters |
|---|---|
| EAN: | 8588006687538 |
| type: | EHT 4.5 |
| power input: | 4500 W |
| voltage: | 230 V |
| fuse protection: | 20 A |
| electrical protection rating: | IP 25 |
| water connection: | 3/8 '' |
| maximum water working pressure: | 1.0 MPa |
| minimum water working pressure: | 0.1 MPa |
| hot water flow rate (Δt=25°C): | 2.6 l/min |
| hot water flow rate (Δt=35°C): | 1.8 l/min |
| switching water flow rate: | 1.8 l/min |
| safety fuse: | yes |
| wall installation: | yes |
| free-standing: | |
| product weight: | 1.5 kg |
| weight: | |
| product dimensions: | w / h / d: 186 x 135 x 87 mm |
| dimensions: height x width x depth: | |
| product warranty: | 2 years |
| efficiency: | |
| EAN: | 8588006687538 |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
