Extension 1/2" - 10 mm

Code: 2520035

Not rated Rating details

Brand: IVAR

2,08 € –28 %

2,08 € –28 % 1,48 € / pcs

In stock now (28 pcs)

Detailed information

9818 skrinka pre rozdelovace 715 mm podomietkova

Action

Manifold cabinet 715 mm - flush-mounted

In stock now (14 pcs)

81,67 €

Manifold cabinet 1325 hpx, 715 x 575-665 x 120-186 mm - flush-mounted ...

1325HPX

Action

AVANSA 25-6/180 - Circulation Pump, 6/4" Connection Thread

In stock now (419 pcs)

38,65 €

Avansa AUTO 25/6/180 Circulation Pump The Avansa AUTO 25/60 180mm circulation...

AVANSA 25/6/180

Action

–44 %

Perimeter expansion strip HPW DP 50

In stock now (14200 m)

0,86 €

0,02 € / 1 m

Expansion strips IVAR for underfloor heating, heating and underfloor heating....

DP50I

–25 %

Screw coupling 16x16 with screw union

In stock now (49 pcs)

2,82 €

Screw coupling 16x16 with screw union requires no pressing, for use with...

PEX.Z16

Show all related products

Product detailed description

Brass threaded extension 1/2" - 10 mm is the most commonly used connector for steel heating pipework, for example under the boiler and in other heating installations.

A brass threaded extension fitting lengthens an existing threaded connection by a precisely defined length. Brass is a long-proven, standard material for threaded water and heating installations thanks to its corrosion resistance and reliable tightness when the joint is properly tightened.

Frequently asked questions

How do I choose the correct fitting size? The thread size (e.g. 1/2", 3/4", 1") must exactly match the thread size of the pipe or fitting you are connecting to - designations such as FF (female-female), MF (male-female) and similar abbreviations in the name indicate the type of thread on each side of the fitting.
What do the abbreviations FF and MF in the name mean? F (female, internal thread) and M (male, external thread) indicate the type of thread on that side of the fitting - for example "FF" means an internal thread on both sides, while "MF" means an external thread on one side and an internal thread on the other.
Do I need to use a sealing material during installation? Yes, a sealing material (e.g. PTFE tape or hemp fibre with sealing paste) is normally used on threaded joints to ensure a perfectly tight seal - the thread alone, without sealant, will not seal reliably.
Does the installation have to be carried out by a professional? A simple threaded connection can be handled by a competent DIYer with basic skills, but when working on an already functioning system (especially a gas or pressurised water/heating installation) we recommend calling in a plumber, who will also check the tightness of the joint after installation.
What material and pressure class does this fitting have? It is made of brass, suitable for standard water and heating installations - exact nominal pressure and temperature values (where specified for the particular product) can be found in the technical parameters above.