Inverted reducer 1“-3/4“ brass

Product detailed description

Inverted reducer 1“-3/4“ brass

- external / internal MF thread
 

• max. pressure up to 1.5 MP
• max. temperature up to 110°C

Brass threaded reducing fitting - connects pipes or fittings of different thread sizes into a single joint. Brass is a long-proven, standard material for threaded water and heating distribution thanks to its resistance to corrosion and reliable tightness when the joint is properly tightened.

Frequently Asked Questions

• How do I choose the correct fitting size? The thread size (e.g. 1/2", 3/4", 1") must exactly match the thread size on the pipe or fitting you are connecting to - designations such as FF (internal-internal), MF (external-internal) and similar abbreviations in the name indicate the thread type on each side of the fitting.
• What do the abbreviations FF and MF mean? F (female, internal thread) and M (male, external thread) denote the thread type on the given side of the fitting - for example "FF" means internal thread on both sides, "MF" means external on one side and internal on the other.
• Is sealing material needed during installation? Yes, threaded joints are normally sealed with a sealing material (e.g. PTFE tape or hemp fiber with sealing paste) to ensure a perfectly tight joint - the thread alone without sealant will not reliably seal.
• Must installation be carried out by a professional? A handy homeowner with basic skills can manage a simple threaded connection, but when working on an already functioning distribution system (especially gas or pressurized water/heating), we recommend calling a plumber who will also verify the tightness of the joint after installation.
• What material and pressure class does this fitting have? It is made of brass, suitable for common water and heating distribution - exact values of nominal pressure and temperature (where stated for the specific product) can be found in the technical parameters above.