Protherm Panther Condens 30 KKO + FE 120 BM + MiSet room controller

Product detailed description

PROTHERM PANTHER CONDENS 30 KKO
- wall-mounted condensing boiler with the option of connecting an external tank
- output: 3.9 - 29.8 kW

With the new Panther Condens condensing boiler, you get a heating system that won't disappoint you. Discover with us the advantages and benefits of top condensing technology for comfortable hot water preparation and reduced heating costs.

NEW DESIGN OF PANTHER CONDENS BOILERS

New FlameFit optimal combustion technology - higher efficiency, lower flue gas emissions, lower gas consumption, technology focused on optimal combustion of different types of gas supplied from various sources with different quality and composition.

New casing design - redesigned boiler look (casing, control panel), while the footprint and connection dimensions have been kept the same as in the previous boiler version, to make quick and easy boiler replacement easier.

New control panel design - panel look in line with the look of the new eBUS controllers, touch buttons, backlit display, simple and intuitive operation and setting, whether for the customer or the service technician.

"Smart shower" function - during showering, the combi boiler guarantees comfortable hot water preparation so that even during an interruption of hot water supply to the shower (while lathering up), it still waits for the next hot water draw-off and does not switch to heating even if there is a demand (it waits 3 minutes).

Accessory connectivity - simple connection and quick attachment of external control accessories such as an internet gateway and/or a wireless room controller, without the need to open the boiler casing, even for the end customer.

Compatibility with the latest eBUS controllers - control panel look in line with the look of the new eBUS controllers, similar controls and easy operation.

COMFORT FUNCTION

The Comfort function guarantees fast delivery of hot water to the draw-off point, by means of a permanently maintained heated primary circuit between the primary and plate heat exchanger. This eliminates the additional lag needed for the initial heating of the plate heat exchanger after a hot water demand is registered. This way, the boiler is permanently ready to deliver hot water, which also guarantees increased comfort for the customer.

Fast delivery of hot water to the draw-off point – saving time and water

"SMART SHOWER" FUNCTION (lathering-up function) - KKV combi boiler

- The "Smart shower" function consists of a 3-minute

delay before the combi boiler switches from hot water preparation mode

to heating mode.

The boiler waits for a possible continuation of showering.

- This prevents the hot water circuit from cooling down too quickly

due to switching to heating (this happens with an immediate

switch to the heating system, when hot water draw-off

stops even for a moment).

- Thanks to this delay, every further draw-off within 3 minutes

is without a change in the temperature of the hot water drawn.

- Interruption of hot water draw-off while showering therefore has

no effect on temperature stability and shower comfort.

Hot water supply comfort is thus permanently ensured even when the boiler has to switch from hot water preparation mode to heating mode.

PARAMETERS

	Panther Condens 30 KKO
Heating
Output at temperature gradient 50/30°C [kW]	3.4 - 32.8
Output at temperature gradient 80/60°C [kW]	3.9 - 29.8
Adjustable heating water temperature range [°C]	15 - 80
Max. operating pressure, heating [MPa]	0.3 MPa (3.0 bar)
Expansion vessel [l]	8
NOx class	6
Energy class for heating	A
Hot water preparation
Maximum output for hot water preparation [kW]	34.8
Adjustable hot water temperature range* [°C]	45 - 60*
Electrical parameters
Voltage/frequency [V/Hz]	230/50
Maximum electrical input [W]	82
Standby power consumption [W]	2
Electrical protection rating [IP]	IPX4D
Dimensions
Gas connection	G 1/2"
Heating connections	G 3/4"
Cold / hot water connections on the boiler side	G 3/4"
Safety valve connection [mm]	15
Condensate drain hose [mm]	21.5
Dimensions H (width/height/depth) [mm]	418/740/344
Weight without water [kg]	32.1

*For system boilers with an external tank

PROTHERM FE 120 BM
- stationary hot water tank
- volume: 120 l

- Indirectly heated tank with a coiled tube heat exchanger

- Net tank volume 117 litres

- Steel tank body with high-quality enamel

- Stationary version suitable for sets underneath wall-mounted boilers

- Corrosion protection with a magnesium anode

- Simple connection of the recirculation circuit

- Easy draining of water from the tank via a built-in drain valve

- Improved cold water stratification at the bottom of the tank thanks to a new design of the cold water inlet diffuser

- Minimal heat loss thanks to a new type of insulation made of rigid PUR foam (energy class "B")

PARAMETERS

	FE 120 BM
Energy class for hot water preparation	B
Usable water volume	117 l
Max. operating pressure	10 bar
Max. water temperature	85 °C
Max. heating water inlet temperature	110 °C
Heating water connection	R 1"
Usable water connection	R 3/4"
Recirculation connection	R 3/4"
Drain valve and plug	G 1"
Heat output	21.4 kW
Hourly flow rate	527
Amount in 10 min.	163 l
Standby energy loss	1 kWh/d
Heat exchanger heating surface area	0.7 m2
Heating water content in the exchanger	4.8 l
Pressure loss in the exchanger at max. heating water consumption	17 mbar
Heat transfer fluid flow rate	1,400 l/h
Continuous hot water output at a heating water temperature of 85/65°C	21.4 kW
Continuous hot water output at a heating water temperature of 85/65°C	527 l/h
Output characteristic	1.4 N
Dimensions
Height / Diameter	822 / 590 mm
Weight with operating fill	185 kg
Weight without water	68 kg

PROTHERM MiSet - room controller

The modern MiSet room controller can reliably control your home's desired temperature with just a few touches. Working with the controller is more intuitive than ever thanks to the new touch display and clear menu structure. An explanation of all the controller's controls will help you understand the relevant functions, and using the time program wizard you can set your subjective comfort. For your heating system, the controller allows you to set up to 12 time intervals with different temperatures per day. In combination with the latest boilers, they provide daily, weekly, monthly and annual overviews, which allow precise monitoring of your energy consumption and help you analyse your individual heating and hot water preparation behaviour, thereby optimising energy savings.

FEATURES:

• Modern glossy black design
• Control using touch buttons
• Option to set up to 12 time intervals with different temperatures per day
• The MiSet controller is suitable for Protherm boilers with an eBUS bus since 2003
• Simple navigation and clear menu structure
• The controller allows setting special functions such as absence mode, boost ventilation, quick hot water, concrete drying, etc.
• Description of controls, menu overview and text help for menu controls
• eBUS communication interface

PARAMETERS

	MiSet
Room temperature setting range	5 - 30 °C
Hot water temperature setting range	35 - 65 °C
Connection	Wired (SRT 380)
Power supply	via eBUS bus
Weather-compensated control	Yes
Adaptive heating curve	Yes
Dimensions (h x w x d)	122 x 122 x 26 mm
Installation	Wall-mounted

Frequently asked questions

• How can I verify that "Protherm Panther Condens 30 KKO + FE 120 BM + MiSet room controller" fits my exact device? The most reliable way is to compare the exact type/catalogue designation from your device's (boiler, tank, water heater) rating plate with the compatibility stated directly in this product's name (PROTHERM brand) and in its technical parameters above. If in doubt, send us the exact type designation of your device (including any serial number) - we will gladly verify compatibility for you.
• Why is it important to use the original/compatible part, and not a universal replacement? Parts such as seals, sensors or safety elements (safety valves, thermal fuses) are usually dimensioned exactly to the parameters of the specific device (pressure, temperature, sensor electrical resistance) - the wrong part can cause reduced functionality, leaks, or in the case of safety elements, even a real safety risk.
• Must this part be installed by a professional? For simpler, mechanical parts (e.g. seals, covers, small accessories without connection to electricity, gas or the pressure section), a handy home user can usually manage the replacement after disconnecting the device from the power supply and pipework. However, for any intervention in the gas, electrical or pressure section of the device (e.g. sensors directly in the combustion chamber, safety valves, electrical modules), we always recommend a service technician - especially if the intervention could affect the validity of the warranty on the whole device.
• How do I know this part is worn and needs replacing? Common symptoms are visible wear/cracking (for seals and rubber parts), leakage of water or flue gases at the location of the part, an error message on the control display (for sensors and electronic modules), or clearly reduced device functionality (e.g. irregular combustion for burner parts). If in doubt, it is safest to have the condition assessed by a service technician during a routine annual inspection.
• Is it worth having this part at home as a spare/service part? For parts that are normally subject to wear (seals, fuses, small mechanical parts) and whose failure would mean a shutdown of heating or water heating, having a spare in advance is a reasonable precaution - especially for an older device, for which it may be more difficult to obtain the part quickly.