Reducer 1" x 3/4" MF
Code: 2520031Related products
Product detailed description
Brass threaded reducer 1" x 3/4" MF is the most commonly used connector for steel heating pipework, for example under the boiler and in other heating installations.
A brass threaded reducing fitting connects pipes or fittings with different thread sizes into a single joint. Brass is a long-proven, standard material for threaded water and heating installations thanks to its corrosion resistance and reliable tightness when the joint is properly tightened.
Frequently asked questions
- How do I choose the correct fitting size? The thread size (e.g. 1/2", 3/4", 1") must exactly match the thread size of the pipe or fitting you are connecting to - designations such as FF (female-female), MF (male-female) and similar abbreviations in the name indicate the type of thread on each side of the fitting.
- What do the abbreviations FF and MF in the name mean? F (female, internal thread) and M (male, external thread) indicate the type of thread on that side of the fitting - for example "FF" means an internal thread on both sides, while "MF" means an external thread on one side and an internal thread on the other.
- Do I need to use a sealing material during installation? Yes, a sealing material (e.g. PTFE tape or hemp fibre with sealing paste) is normally used on threaded joints to ensure a perfectly tight seal - the thread alone, without sealant, will not seal reliably.
- Does the installation have to be carried out by a professional? A simple threaded connection can be handled by a competent DIYer with basic skills, but when working on an already functioning system (especially a gas or pressurised water/heating installation) we recommend calling in a plumber, who will also check the tightness of the joint after installation.
- What material and pressure class does this fitting have? It is made of brass, suitable for standard water and heating installations - exact nominal pressure and temperature values (where specified for the particular product) can be found in the technical parameters above.
Additional parameters
| Category: | Reducers |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.1 kg |
Product rating
Be the first who will post an article to this item!
Discussion
List of discussions
J
Jozef
Jozef
Dobrý deň, Prosím poradiť. Na prívode vody do čerpadla vodárne mám nainštalovaný guľový ventil 1 1/4". Na tento ventil chcem napojiť ručnú pumpu, ktorá ma 5/4" nasávanie. Akú redukciu si mám zaobstarať? Vopred ďakujem za pomoc. Pekný deň
A
ATRIA
ATRIA
Dobrý deň, Žiaľ rada by som Vám pomohla ale neviem v tomto prípade ako. Prajem Vám pekný zvyšok dňa.
J
Jaro
Jaro
Dobry vecer. Potreboval by som zohonat spojky, na spojenie vodorovnej ocelovej rurky cca ?42mm so zvislou cca?80-100mm.Bude sa jednat o ocelovu konstrukciu v exterieri ktora musi udrzat bez problemov cloveka.Pri spokojnosti je mozny vacsii odber. Dakukem
A
ATRIA
ATRIA
Dobrý deň, Vami požadovaný tovar žiaľ v našej ponuke nemáme. Prajem pekný deň.
K
Kristián
Kristián
Dobrý deň Potreboval by som sa spýtať Mám zahradny vodovodny kohut 3/4 a nato by som potreboval napojiť práčku vedeli by ste my poradit redukciu?
A
ATRIA
ATRIA
Dobrý deň, neviem akú hadicu má práčka a aký má závit, ale skúste si pozrieť medzi mosadznými redukciami a vsuvkami : https://www.atria.sk/vykurovacia-technika/spojky-fitingy-na-rury/mosadzne-zavitove-fitingy/ Pekný deň.
S
Salvador
Salvador
dobry den chcem sa spytat na radekciu co sa tika mam zeleznu ruru pre radiatory 11 cm obvod a chcem tam dat novy roadiator ktory ma zavyt 2 cm za radu v pred van dakujem