Reversed Reducer 3/4"-1/2" brass

Product detailed description

Reversed Reducer 3/4"-1/2" brass

- male / female MF thread
 

• max. pressure up to 1.5 MPa
• max. temperature up to 110°C

A brass threaded reducing fitting - it connects pipes or fittings with different thread sizes into a single joint. Brass is a long-proven, standard material for threaded water and heating pipework thanks to its corrosion resistance and reliable tightness when the joint is properly tightened.

Frequently Asked Questions

• How do I choose the right fitting size? The thread size (e.g. 1/2", 3/4", 1") must exactly match the thread size on the pipe or fitting you are connecting it to - dimension codes such as FF (female-female), MF (male-female) and similar abbreviations in the name indicate the thread type on each side of the fitting.
• What do the abbreviations FF and MF in the name mean? F (female thread) and M (male thread) indicate the thread type on the given side of the fitting - for example, "FF" means a female thread on both sides, while "MF" means a male thread on one side and a female thread on the other.
• Do I need to use sealing material during installation? Yes, sealing material (e.g. PTFE tape or hemp fibre with sealing paste) is normally used on threaded joints to ensure a perfectly tight connection - the thread alone, without sealing, will not reliably seal.
• Does installation need to be carried out by a professional? A simple threaded connection can be handled by a competent DIY person with basic skills, but for work on an already functioning system (especially a gas or pressurised water/heating system) we recommend calling in a plumber, who will also check the tightness of the joint after installation.
• What material and pressure rating does this fitting have? The design is brass, suitable for standard water and heating pipework - the exact nominal pressure and temperature values (where stated for the specific product) can be found in the technical parameters above.