Assembly manifold/collector - without cabinet - 1"xEK; 3-way; brass
Code: 553771BSRelated products
Product detailed description
Assembly manifold IVAR.CS 553 DRS, size: 1" x EK, 3-way
- PN 10, T = +120 °C
- the set includes: manifold with control unions, collector with shut-off valves, mounting brackets, 2 pcs ball valves with unions, 2 pcs end fittings with automatic air vent valve and rotary drain valve
- material: brass CW617N
Assembly for radiator heating or k sanitary distribution without pump fitted control valves.
Recommended for a temperature gradient of the radiator part of the system +75 ˚C / +65 ˚C
Fitted circulation pump: without pump (not is needed, since pump replaces boiler)
K to make it easier settings control parameters underfloor heating we recommend to fit set thermometers a flow meters.
Note: The seller is not responsible for functional defects caused by impurities in the system.
Before every commissioning of the heating system, especially when combining underfloor and radiator heating, it is strongly recommended to flush the whole system according to the manufacturer's instructions. We recommend treating the system with the product GEL.LONG LIFE 100.
Manifolds are installed in cabinets; their recommended lengths are given in the manifold table. Fitting the manifolds at the highest point is practically a requirement (watch out for level changes in the floor plan). The exception is venting small floor loops on a higher storey via a bathroom towel radiator. If the floor system is installed only in bathrooms, it is possible to use a pipe from the return branch of the radiator system with a polyethylene conduit, or a direct-acting temperature regulator can be used at the end of this parallel loop, which will ensure cooling to a low temperature level (caution! it must be thermally separated from the return of the radiator circuit with that it is not thermally affected).
For further information you can go to the questions and answers at https://www.systemova-doska.sk/podlahove-heating/
Additional parameters
| Category: | IVAR CS 553 DRS |
|---|---|
| Warranty: | 2 years |
| Weight: | 4.789 kg |
| EAN: | 8595145903603 |
| Nominal pressure: | PN 10 |
| Last price update: | 13.04.2026 1:08:39 |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!