Compression fitting - for ALPEX multilayer pipe - 16x2 ALU-M 24

Product detailed description

• PN 10, T = +120 °C
• Eurocone (EK) or M24 thread
• material: brass CW617N, EPDM O-ring
• tightening torque 25 - 35 Nm
• suitable for ALPEX pipe

2. Insert the pipe and the corresponding EPDM seal into the fitting and make sure everything is clean and the sealing O-ring has not been damaged.

3. Fit the nut onto the thread and tighten it by hand; for full tightening use a wrench of the appropriate size AC 670 / AC 671

Rubber parts must never be lubricated with mineral oils; for EPDM material only use a silicone-based lubricant.

Frequently Asked Questions

• How do I choose the correct size of fitting? The thread size must exactly match the thread on the pipe or fitting it connects to - the abbreviations FF (internal-internal thread) and MF (external-internal) in the name indicate the thread type on each side.
• Is sealing material needed for installation? Yes, PTFE tape or hemp fibre with sealing paste is normally used on threaded joints to ensure a perfectly tight connection.
• Does the installation have to be done by a professional? A simple threaded connection can be made by a DIY user with basic skills; for work on an already functioning system (especially gas), we recommend calling in a plumber, who will also check the tightness of the joint.