Compression fitting - for PEX pipe - 12x2 PEX-EK

Product detailed description

Compression fitting - for PEX pipe, IVAR.TP 4410, size: 12 x 2 PEX - EK, packaging: 40 ks per bag / 320 pcs per box

• PN 10, T = +120 °C
• Eurocone (EK) thread
• material: brass CW617N, O-ring EPDM
• tightening torque 30 - 40 Nm
• suitable for PEX pipe

2. Insert the pipe and the appropriate EPDM seal into the fitting and make sure everything is clean and the sealing O-ring has not been damaged.

3. Fit the nut onto the thread and tighten it by hand; for full tightening use a wrench of the appropriate size, AC 670 / AC 671

Rubber parts must never be lubricated with mineral oils; for EPDM material, only silicone-based lubricant should be used.

Frequently Asked Questions

• How do I choose the correct size of fitting? The thread size must exactly match the thread on the pipe or fitting to which it is connected - the abbreviations FF (female-female) and MF (male-female) in the name indicate the thread type on each side.
• Is sealing material needed for installation? Yes, PTFE tape or hemp fibre with sealing paste is normally used on threaded joints to ensure a perfectly tight connection.
• Must installation be carried out by a professional? A simple threaded connection can be made by a competent DIY user with basic skill, but for work on an already functioning system (especially gas), we recommend calling in a plumber, who can also verify the tightness of the joint.