>

ELÍZ EURO 200 D2

Code: ELZ_3355
napojeny tovar
Not rated Rating details
1 317,07 € –1 %
200 d2
1 317,07 € –1 % 1 303,90 € / pcs Measure price:
In stock at supplier (3 pcs)

Detailed information

Product detailed description

EURO 200 D2 is a stationary, floor-standing water heater with a capacity of 200 litres. The heater has a built-in electric heating element with an output of 3 kW and is fitted with two heating exchanger coils with a larger exchanger surface area for connecting two external hot-water heat sources, e.g. a heat pump, a central heating boiler or a solar system. The water can be heated using electric energy (electric heating element) or two other heat sources connected to the exchangers – a heat pump, local central heating, a solar system. The electric heating element is installed in the lower part of the heater on a flange. When heating the water with the electric heating element, you can set the required water temperature using the thermostat on the control panel. The inner tank of the heater and the heating exchanger are made of high-quality steel and are protected by a special direct enamelling surface treatment (glass-ceramic enamel with added zirconium). The enamelled tank and exchanger are protected against corrosion by double anode protection - two magnesium alloy anode rods are installed in the tank, which reduce the effects of corrosion and extend the tank's service life. There is a circulation port in the middle part of the tank for connecting a circulation line. The tank has ports for additional immersion sleeves for controlling the regulation system (thermostat communication sensors). Main advantages and features: High output, fast water heating Enlarged surface area of the 2 exchangers for connecting a heat pump and another heat source Energy class B High-quality steel tank and heating exchanger protected by zirconium enamel CFC-free high-density polyurethane insulation, 85 mm thick Low heat losses and low operating costs thanks to thick insulation Ports for thermostat communication sensors of the external heat source Safety - unique 6-stage protection Double anode protection of the tank - 2 magnesium anodes Thermostat for electric heating - range 10 - 75 °C ECO mode setting Thermal fuse against overheating Temperature indicator Waterproof switch with heating-in-progress indicator light Metal 3/4" safety valve with non-return valve included with the heater Extended 5-year warranty on the heater tank Technical data sheet

Additional parameters

Category: Storage water heaters for heat pumps
Weight: 98 kg
type:
power input:
voltage:
fuse protection:
electrical protection rating:
power switching:
maximum tank pressure:
water connection:
water heating time 12 - 65 °C:
heat loss:
coil connection: 1"
coil surface area S1:
coil output S1:
circulation:
free-standing:
safety fuse:
weight:
product dimensions: w / h / d:
tank warranty:
product warranty:
maximum water working pressure:
water flow rate 38 °C:
minimum switching pressure:
coil surface area S2: 1.63 m²
coil output S2: 42 kW
volume:
max. water pressure in the heater:
maximum heat output:
efficiency:
heating volume:
heat output in the room:
water heat exchanger output:
exchanger connection:
minimum chimney draught:
flue gas temperature:
CO content in flue gases at 13% O2 at maximum output:
flue pipe diameter:
product weight:
dimensions: height x width x depth:
warranty:
water heating time 15 - 65 °C:
hot water flow rate (Δt=25°C):
hot water flow rate (Δt=35°C):
minimum water working pressure:
switching water flow rate:
wall installation:

Product rating

Be the first who will post an article to this item!

Do not fill out this field:

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field:
Vytvořil Shoptet | Design Shoptak.cz. > >