ELÍZ EURO 300 D2
Code: ELZ_3356Product detailed description
EURO 300 D2 is a stationary, floor-standing water heater with a capacity of 300 litres. The heater has a built-in electric heating element with an output of 9 kW and is fitted with two heating exchanger coils for connecting an external hot-water heat source, e.g. a heat pump, a central heating boiler or a solar system. The water can be heated using electric energy (electric heating element) or another heat source connected to the two exchangers – a heat pump, local central heating, a solar system. The electric heating element is installed in the lower part of the heater on a flange. When heating the water with the electric heating element, you can set the required water temperature using the thermostat on the control panel. The inner tank of the heater and the heating exchanger are made of high-quality steel and are protected by a special direct enamelling surface treatment (glass-ceramic enamel with added zirconium). The enamelled tank and exchanger are protected against corrosion by double anode protection - two magnesium alloy anode rods are installed in the tank, which reduce the effects of corrosion and extend the tank's service life. There is a circulation port in the middle part of the tank for connecting a circulation line. The tank has ports for additional immersion sleeves for controlling the regulation system (thermostat communication sensors). Main advantages and features: High output, fast water heating Enlarged surface area of the two exchangers for connecting a heat pump and another heat source Energy class B High-quality steel tank and heating exchanger protected by zirconium enamel CFC-free high-density polyurethane insulation, 85 mm thick Low heat losses and low operating costs thanks to thick insulation Ports for thermostat communication sensors of the external heat source Safety - unique 6-stage protection Double anode protection of the tank - 2 magnesium anodes Thermostat for electric heating - range 10 - 75 °C ECO mode setting Thermal fuse against overheating Temperature indicator Waterproof switch with heating-in-progress indicator light Metal 3/4" safety valve with non-return valve included with the heater Extended 5-year warranty on the heater tank Technical data sheetAdditional parameters
| Category: | Storage water heaters for heat pumps |
|---|---|
| Weight: | 125 kg |
| type: | |
| power input: | |
| voltage: | |
| fuse protection: | |
| electrical protection rating: | |
| power switching: | |
| maximum tank pressure: | |
| water connection: | |
| water heating time 12 - 65 °C: | |
| heat loss: | |
| coil connection: | 1 " |
| coil surface area S1: | |
| coil output S1: | |
| circulation: | |
| free-standing: | |
| safety fuse: | |
| weight: | |
| product dimensions: w / h / d: | |
| tank warranty: | |
| product warranty: | |
| maximum working water pressure: | |
| water flow rate 38 °C: | |
| minimum switching pressure: | |
| coil surface area S2: | 2.37 m² |
| coil output S2: | 65 kW |
| volume: | |
| max. water pressure in the heater: | |
| maximum heat output: | |
| efficiency: | |
| heating volume: | |
| heat output in the room: | |
| water heat exchanger output: | |
| heat exchanger connection: | |
| minimum chimney draft: | |
| flue gas temperature: | |
| CO content in flue gases at 13% O2 at maximum output: | |
| flue pipe diameter: | |
| product weight: | |
| dimensions: height x width x depth: | |
| warranty: | |
| water heating time 15 - 65 °C: | |
| hot water flow rate (Δt=25°C): | |
| hot water flow rate (Δt=35°C): | |
| minimum working water pressure: | |
| switching water flow rate: | |
| wall installation: |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
