ELÍZ EURO 80 Z

Product detailed description

Electric pressure water heater ELÍZ EURO 80 Z with a capacity of 80 litres in a SLIM design is suitable for one or more draw-off points. It is designed for vertical wall mounting. The water heater tank is made of high-quality steel protected with a layer of zirconium enamel. High-quality CFC-free polyurethane insulation with a thickness of 33 mm ensures low heat losses and savings on water heating costs. Using the thermostat located on the control panel, you can set the water temperature within the range of 7 - 75°C, with the option of setting the ECO mode. When set to ECO mode, the water is heated to an optimal temperature of 55°C, with reduced heat losses and lower electricity consumption. The minimum thermostat value serves as protection against water freezing in the heater. The heater has two built-in anode rods, which guarantee effective corrosion protection of the tank and significantly extend its lifespan. The switch with an illuminated heating indicator is used to turn the heater on/off in case of our absence, allowing for energy savings. Main advantages and features: Fast water heating Energy class C High-quality steel tank with zirconium enamel CFC-free polyurethane insulation with high density, 33 mm thickness Low heat losses and low operating costs thanks to thick insulation Safety - unique 6-level protection Double anode protection of the tank - 2 magnesium anodes Thermostat located on the control panel - range 7 - 75 °C ECO mode setting Thermal fuse against overheating Temperature indicator Water-resistant switch with indicator light for ongoing heating Wall bracket and metal safety valve with check valve included with the heater Extended 5-year warranty on the heater tank

Frequently Asked Questions

• What tank volume should I choose? A common estimate of consumption is based on approximately 40-50 litres of hot water (at approx. 40-45 °C) per person per day for standard use (showering, washing); for bathing in a tub or a larger number of bathrooms/draw-off points, a higher volume should be considered. When choosing, also take into account whether the tank will be heated by a high-output boiler (faster heating, a smaller volume may suffice) or, for example, only by a solar system (where, on the contrary, a larger volume is worthwhile for heat accumulation during the day).
• Can I connect this ELIZ tank to an existing boiler? In most cases yes, but you should check the compatibility of the hydraulic connection (dimensions and type of fittings) and whether your boiler supports control of the tank heating (a temperature sensor in the tank and possibly a switching valve are needed) - you can find these details in the product's technical parameters or our customer service can advise you.
• Where and how is the tank placed? The tank is placed as close as possible to the heat source (boiler) to minimize heat losses in the connecting pipework, while still allowing sufficient space around it for service access (anode replacement, safety valve inspection).
• Must the installation be done by a professional? We always recommend entrusting the hydraulic connection to the water supply and heat source, including installing the safety valve at the correct pressure, to a heating technician/plumber - an incorrectly installed or missing safety valve poses a safety risk.