ELÍZ EWHP 300 EW

Product detailed description

Hot water from air! Save on operating costs. ELÍZ heat pumps for water heating meet the latest trends in the use of green energy. They work on the air-to-water principle with a high energy efficiency class of A+. They successfully replace classic electric water heaters. The compact 2-in-1 pump with low power consumption draws energy directly from the air, which the compressor converts into heat. The heat produced is transferred to a condensing heat exchanger, which, thanks to its large area around the tank, heats the water in the water heater. The pump uses R134A refrigerant and an additional 2 kW electric heating element.  Heat pump control The entire water heating process is controlled by a digital control unit with a large touch display. The electronics are controlled by simple and intuitive software specially designed to automate water heating control. The heat pump includes a modern WIFI function, so you can control it via your smart device from the comfort of anywhere. The electronics allow water heating in several modes:AUTO - combination of heat pump and electric heating element (the pump automatically evaluates the need in case of temperature fluctuations)ECO - heat pump onlyFAST - intensive heating (using the heat pump and electric element simultaneously for even faster water heating)The water temperature when heating with the heat pump is 55°C, and up to 75°C with additional heating by the electric coil. The electronics display shows the operation of the heat pump, the water temperature in the heater tank, as well as all system and error messages (if they occur). It provides a wide range of operating parameter settings, water heating timer settings, and statistics display. The water heater tank is made of high-quality steel protected by a layer of zirconium enamel. High-quality CFC-free polyurethane insulation with a thickness of 50 mm ensures low heat losses and thus increases savings on water heating costs. Product advantages: Energy efficient - low operating costs High coefficient of performance - COPDWH 3.47 (at an outdoor temperature of 20°C) Efficient operation during all seasons Easy indoor installation Innovative design of the condensing heat exchanger - aluminum heat exchanger with a large area around the tank Installed electric heating element with a power input of 2000 W Maximum temperature when heating with the heat pump is 55°C Up to 75°C with additional heating by the electric coil Digital control unit with multiple heating modes - controls and reliably operates each circuit: heat pump, electric element Water temperature setting in the range of 20 - 75°C Electronic thermoregulation valve Diagnostics and error message reporting Frost protection, Overheating protection Anti-Legionella bacteria protection WIFI control Operating Manual, Technical Data Sheet