Flow-through system so Siliphosom H10BB komplet

Product detailed description

Flow-through system so Siliphosom H10BB komplet is used to treat drinking water. Siliphos prevents limescale build-up and rusting, which increase the energy consumption needed to heat water. The end result of using Siliphos is a significant reduction in energy costs.

- suitable for a large family house or a smaller apartment building.

The H10BB set comes complete with an installation wrench, a wall-mounting bracket and a container of 1600 g of Siliphos. 

Basic characteristics:

The flow-through unit with Siliphos is a universal and economical solution that prevents limescale build-up and corrosion in drinking water systems and prevents limescale forming in hot water preparation equipment as well as during every heating of water in flats and houses.

Flow-through unit so Siliphosom sa uspesne aplikuje aj v hoteloch, penzionoch, restauraciach, fitnes centrach, nakupnych centrach, v bytovych domoch, v potravinarskych a inych vyrobnych podnikoch. Uplatnenie Siliphosu je vsade tam, kde je voda tvrda, alebo velmi makka.

Technical solution proposal for Siliphos:

Flow-through units with Siliphos can be installed on any water system and require no electricity. Installation and refilling are extremely simple.

Siliphos je specialny produkt, vyrabany v Nemecku a pouzivany viac ako 35 rokov v celej Europe. Ma suhlas hygienickych organov vo vsetkych krajinach EU na jeho pouzivanie pre pitnu vodu.

Pouzitie Siliphosu nie je zmakcovanie, voda ostava rovnako tvrda, teda zdrava. Tvrda voda je zdravsia ako voda makka. Siliphos v porovnani so zmakcovanim je lacnejsi na obstaranie aj na prevadzku.

Siliphos performs three functions:

- On the metal surface of pipework, heating elements and coils, on nozzles, measuring and control components, taps and sanitary fittings, it forms a microfilm that completely prevents limescale build-up and rusting.

- It does not allow calcium and magnesium dissolved in the water to settle on metal and ceramic surfaces in the form of limescale.

- It gradually removes old limescale and rust deposits from metal surfaces. 

The acquisition cost is recovered very quickly, since it prevents limescale or rust incrustation forming. Limescale and rust significantly worsen heat-transfer parameters, and 30-40% more energy is consumed to heat the same amount of hot water when limescale and rust do form. The service life of energy equipment is extended. Further savings appear in reduced use of cleaning products on taps and ceramic tiling.

A flow-through unit fitted in the main drinking water supply treats all equipment (water pipework, taps, instantaneous water heaters, washing machines, dishwashers, kettles, irons, bathroom tiles, baths, toilets, etc.).

The size of the flow-through unit depends on water consumption. Since peak consumption accounts for around 66% of the daily total and lasts a maximum of 2 hours, the flow-through unit must be sized so that no water shortage occurs during peak demand. The maximum working pressure is 10 bar. Pressure loss will be minimal. 

• Siliphos has a positive effect on virtually the entire range of water types used.
• Siliphos works against both limescale and rust at the same time.
• Siliphos acts preventively and permanently protects pipes, heating elements and fittings.
• Siliphos is the only product that also removes some old limescale deposits at the same time.
• Siliphos is hygienically harmless and approved as safe for drinking water.
• Applying Siliphos does not increase energy consumption and requires only minimal maintenance when refilling flow-through units.
• Siliphos consumption is very low. One kilogram of Siliphos treats up to 500 m³ of water.