HAKL Fixing Tape 25 m - Steel

Code: HAFX25BAL

Not rated Rating details

Brand: HAKL

32,50 € –21 %

32,50 € –21 % 25,44 € / pcs

1 week

Detailed information

Product detailed description

HAKL Fixing Tape 25 m - Steel

By using the FX fixing tape you achieve quick and easy securing of heating cables at regular intervals, ensuring even heating of the floor. Installation of the fixing tape is very simple - it is anchored using screws into the base . The spacing (mutual distance) between the cables depends on the required per square metre. The closer the heating cables are to each other, the higher the heating output per square metre. The manufacturer recommends consulting the heating installation with a specialist.

Steel Fixing Tape

quick securing of heating cables
simple, hassle-free installation
fixing points every 2.5 cm
regular cable spacing ensures even heating of the floor
can be anchored to the base concrete

Technical parameters:

Length: 25 m

Fixing tape consumption per 1m2 of area: 3 m

Fixing tape width: 20 mm

Sheet thickness: 0.4 mm

Frequently Asked Questions

When should I use a fixing tape instead of a system panel? The fixing tape is used in the so-called wet system of laying the heating cable directly into the screed layer without a system insulation panel - it is anchored with screws into the base concrete, and the cable is then fixed into it at regular intervals.
How do I determine the correct cable spacing on the tape? The spacing is based on the required heating output per m² - the closer together the cables are laid, the higher the output (and therefore the floor temperature) achieved in the given room. We will gladly help you calculate the exact spacing for your specific cable and required output.
How is the tape installed? The tape is simply anchored with screws directly into the base concrete along lines corresponding to the chosen spacing, and the heating cable is then gradually laid into its fixing points.
Why is the tape made of steel? The steel construction guarantees sufficient fastening strength throughout the entire installation and screed pouring process, when the tape is mechanically stressed, and it also does not deform on contact with heat from the cable.