>

Horizontal check flap CLAPET - 1" FF, soft seal on disc

Code: I08406100
napojeny tovar
Not rated Rating details
26,45 € –20 %
4040 vodorovna spatna klapka clapet 1 ff makke tesnenie na disku
26,45 € –20 % 21,16 € / pcs Measure price:
In stock now (5 pcs)

Detailed information

Product detailed description

Horizontal check flap CLAPET, FIV.08406, size: 1" FF, packaging: 10 pcs

 

  • PN 10, T = +80 °C
  • soft seal on disc
  • thread female – female FF
  • material brass CW617N
  • certified for drinking water
 

Frequently Asked Questions

  • How do I choose the right type and size of fitting/valve? Follow the nominal pressure (PN) and operating temperature (T) stated in the technical parameters - they must match or exceed the actual operating conditions of your system, and the connection size must match the pipe diameter.
  • How does this fitting/valve work? The exact operating principle (shut-off, pressure regulation, non-return function, etc.) depends on the specific type - a detailed description of the function can be found above, with this product.
  • Must installation be carried out by a professional? Simple shut-off fittings can be installed even by a skilled DIYer, but for control and safety fittings (safety valves, pressure reducing valves) we always recommend a professional, as these are components with a safety function.

Additional parameters

Category: horizontal check valves
Warranty: 2 years
Weight: 0.39 kg
Material type: brass CW617N CERTIFIED for drinking water
Operating temperature: +80 °C
Nominal pressure: PN 10
Last price update: 13.04.2026 1:05:11

Product rating

Be the first who will post an article to this item!

Do not fill out this field:

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Do not fill out this field:

List of discussions

M Avatar of author 19/01/2022 12:10
Zdravim,mam problem s tym,ze ked mam zohriaty bojler a kotol dokuri,tak sa mi voda z bojlera strati do systemu,cize rano ked vstanem je voda v bojleri studena,,da sa to urobit tym,ze vypnem privod a spiatocku z kurenia do bojlera,ale chcel by som to zautomatizovat. Pomohla by mi tato klapka?ak ano,kde by ju bolo dobre osadit?Dakujem vopred za odpoved.
A Avatar of author 19/01/2022 12:10
Dobrý deň. Neviem presne ako zapojený máte bojler do systému. Ale po správnosti by to malo byť takto https://www.atria.sk/clanky/co-treba-ku-kotlu-na-drevo-ake-prislusenstvo/, kde vidíte aj reguláciu aj elektronický ventil, ktorý sa dá ovládať časovo alebo podla teploty. Pekný deň
B Avatar of author 19/01/2022 12:09
Dobry den chapem.spravne ze tato klapka bude fungovat len vo vodorovnej polohe?
A Avatar of author 19/01/2022 12:10
Dobrý deň, áno presne tak. Ide o vodorovnú spätnú klapku. Pekný deň.
Vytvořil Shoptet | Design Shoptak.cz. > >