Horizontal set Ø 80/125 mm – 1 m - (the set does not include a boiler adapter)

Product detailed description

Horizontal set Ø 80/125 mm – 1 m - (the set does not include a boiler adapter)

Content of the set:

• 1 × exhaust pipe ∅ 80 mm
• 1 × suction tube ∅ 125 mm
• 1 × elbow ∅ 80/125 mm
• 1 x sealing ∅ 80 mm
• 1 × clip ∅ 125 mm x 70 + connecting material
• 1 × external plastic rose
• 1 × internal plastic rose

Total length: 1 m
Pressure loss: 1.5 Em

Note: Used in the case of a horizontal outlet through a wall. Does not include flue adapter ∅ 80/125 mm.

Adapter for flues Ø 80/125 mm A25K (for boilers Gepard Condens, Lev 25 KKZ90, Lev Heliotwin)

Adapter for flue pipes Ø 80/125 mm A25KP (for Tiger, Panther and Puma boilers)

Frequently Asked Questions

• How can I check that the "Protherm horizontal set 80/125 mm S25KZ - 1m (the set does not include a boiler adapter)" fits my appliance exactly? The most reliable way is to compare the exact type/catalogue designation on your appliance's (boiler, tank, water heater) rating plate with the compatibility stated directly in this product's name (brand PROTHERM) and in its technical parameters above. If in doubt, send us the exact type designation of your appliance (including the serial number, if available) - we will be happy to verify compatibility for you.
• Why is it important to use an original/compatible part rather than a universal replacement? Parts such as seals, sensors, or safety components (safety valves, thermal fuses) are usually dimensioned precisely for the parameters of the specific appliance (pressure, temperature, sensor electrical resistance) - an incorrect part can cause reduced function, leaks, or, in the case of safety components, a genuine safety risk.
• Must installation of this part be carried out by a professional? For simpler mechanical parts (e.g. seals, covers, minor accessories with no connection to electricity, gas, or pressurised components), a handy homeowner can usually manage the replacement after disconnecting the appliance from power and the utility connections. For any intervention in the gas, electrical, or pressurised part of the appliance (e.g. sensors located directly in the combustion chamber, safety valves, electronic modules), however, we always recommend a service technician - especially since such an intervention could affect the validity of the appliance's warranty.
• How do I know this part is worn and needs to be replaced? Common symptoms include visible wear/cracking (for seals and rubber parts), a water or flue gas leak at the part, an error message on the control display (for sensors and electronic modules), or a noticeably reduced function of the appliance (e.g. irregular combustion for burner parts). If in doubt, it is safest to have the condition assessed by a service technician during the regular annual inspection.
• Is it worth keeping this part at home as a spare/service item? For parts that are subject to normal wear (seals, fuses, small mechanical parts) and whose failure would mean an interruption to heating or hot water, keeping a spare on hand is a reasonable precaution - especially for an older appliance, for which the part may be harder to source quickly.