Protherm Splitter Element 2 x Ø 80 mm R2K

Product detailed description

A splitter element is used for a separated (not coaxial) intake and exhaust routing - it splits the flow from a single boiler outlet into two separate pipes with their own diameter, e.g. when the intake and exhaust need to run along different routes.

Protherm Splitter Element 2 x Ø 80 mm R2K, plastic (for Gepard Condens, Lev 25 KKZ90, Lev Heliotwin boilers)

A flue splitter element by Protherm for a separated flue with an 80 mm size, designed for the Gepard Condens, Lev 25 KKZ90 and Lev Heliotwin condensing boilers.

Set contents:

• 1 × splitter element with tapping points
• 1 × seal for the boiler's air section
• 2 × Ø 80 mm seal
• 4 × self-tapping screws

Pressure loss: 0.5 Em

Note: Not usable with Lev wall-hung boilers.

Frequently asked questions

• How do I check that the "Protherm Splitter Element 2 x Ø 80 mm R2K" fits my appliance exactly? The most reliable way is to compare the exact type/catalogue designation from your appliance's (boiler, tank, water heater) rating plate with the compatibility stated directly in this product's name (PROTHERM brand) and in its technical parameters above. If in doubt, write to us with the exact type designation of your appliance (including the serial number, if available) - we will be happy to verify compatibility for you.
• Why is it important to use the original/compatible part rather than a universal replacement? Parts such as seals, sensors or safety components (safety valves, thermal fuses) are generally sized precisely to the parameters of the specific appliance (pressure, temperature, sensor electrical resistance) - the wrong part can cause reduced functionality, leaks, or, in the case of safety components, an actual safety risk.
• Does this part need to be installed by a professional? For simpler, mechanical parts (e.g. seals, covers, small accessories with no connection to electricity, gas or the pressurized section), a handy DIY person can usually manage the replacement after disconnecting the appliance from the power supply and pipework. However, for any work on the gas, electrical or pressurized section of the appliance (e.g. sensors located directly in the combustion chamber, safety valves, electrical modules), we always recommend a service technician - especially since such work could otherwise affect the validity of the warranty on the whole appliance.
• How do I know this part is worn and needs replacing? Common symptoms include visible wear/cracking (for seals and rubber parts), water or flue gas leaking at the part, an error message on the control display (for sensors and electronic modules), or an obviously reduced function of the appliance (e.g. irregular combustion for burner parts). If in doubt, the safest option is to have the condition assessed by a service technician during the regular annual inspection.
• Is it worth keeping this part at home as a spare? For parts that are subject to normal wear (seals, fuses, small mechanical parts) and whose failure would mean an interruption to heating or hot water, keeping a spare on hand is a sensible precaution - especially for an older appliance, for which the part may be harder to source quickly.