Protherm - Elbow Ø 80/125 mm - 90° with inspection opening, K25KR

Product detailed description

A flue elbow with an inspection/service opening allows the inside of the pipe to be checked and cleaned without having to dismantle the entire flue run - suitable for a location where regular inspection of patency is planned.

Protherm Elbow Ø 80/125 mm - 90° with inspection opening

• 1 × 90° elbow  with inspection opening Ø 80 / 125 mm
• 1 × seal Ø 80 mm
• 1 × clamp Ø 125 mm
• fixing material

FAQ

• How can I check that the „Protherm - Elbow Ø 80/125 mm - 90° with inspection opening, K25KR“ fits my exact appliance? The most reliable way is to compare the exact type/catalogue designation on your appliance's rating plate (boiler, cylinder, water heater) with the compatibility stated directly in this product's name and in its technical parameters above. If in doubt, send us the exact type designation of your appliance (including the serial number, if available) - we will be happy to verify the compatibility for you.
• Why is it important to use an original/compatible part rather than a universal replacement? Parts such as seals, sensors or safety components (safety valves, thermal fuses) are usually dimensioned precisely to the parameters of the specific appliance (pressure, temperature, sensor electrical resistance) - the wrong part can cause reduced functionality, leaks, or in the case of safety components, a real safety risk.
• Must this part be installed by a professional? With simpler, mechanical parts (e.g. seals, covers, small accessories with no connection to electricity, gas or the pressurised section), a handy DIY enthusiast can usually manage the replacement after disconnecting the appliance from power and the supply lines. For any intervention in the gas, electrical or pressurised part of the appliance (e.g. sensors located directly in the combustion chamber, safety valves, electrical modules), however, we always recommend a service technician - especially where the intervention could affect the validity of the warranty on the whole appliance.
• How do I know this part is worn and needs to be replaced? Common symptoms are visible wear/cracking (for seals and rubber parts), water or flue gas leaking at the part, an error message on the control display (for sensors and electronic modules), or a clearly reduced functionality of the appliance (e.g. irregular combustion for burner parts). If in doubt, the safest option is to have the condition assessed by a service technician during the regular annual inspection.
• Is it worth keeping this part at home as a spare? For parts that are normally subject to wear (seals, fuses, small mechanical components) and whose failure would mean a shutdown of heating or hot water production, keeping a spare on hand is a sensible precaution - especially for an older appliance, for which it may be harder to obtain the part quickly.